Event Photo Props
A selfie frame has one job: get your hashtag into other people's photos.
Not sure which Event Photo Props product to pick?
🔥 Budget-friendly🔥 Digital proof before printing🔥 Free design help
12,000+ businesses rate us 4.6★
“I didnt imagine the quality to come back so good! Very fast delivery!”
“Great product, great price's, quick delivery. Thank you Vivid Ads.”
“Turned out better than expected - great price and fast delivery”
Perfect for
Selfie frames, hashtag signs and foam board wedding signs for the photo corner and welcome table.
Big head cutouts made from your own photo — the prop everyone wants in the picture.
A branded selfie frame or hashtag sign puts your logo and handle in every guest's photo.
Big head cutouts held up in the stands, printed on waterproof corflute.
Event Photo Props — your questions answered
What are the props made from?
Selfie frames, big head cutouts and hashtag signs are printed on 5mm corflute — rigid enough not to flop, light enough to hold up, and waterproof.
Do they arrive cut to shape?
Yes. Each prop is contour-cut on our digital cutting table, so it arrives ready to use — no scissors or knife needed.
What sizes are available?
Selfie frames come in 600 × 900mm and 800 × 1200mm; big head cutouts in A3, A2 and A1; hashtag signs in small, medium and large. Ask for a quote for a custom size.
Can I use my own photo or design?
Yes. Upload your artwork or photo; every order includes a free digital proof to approve before printing.
What turnaround can I expect?
Production takes 24 production hours after you approve your proof — artwork approved by 3pm counts as that day. Transit is added on top and depends on your postcode and carrier. Same-day production can be added to many products at checkout.
How do I supply artwork?
Print-ready PDF is preferred; AI and EPS are accepted. Use CMYK with 3mm bleed. No artwork? Add our design service. Every file gets a free pre-flight check, and a free digital proof is included on every order.
How much is delivery?
Freight is calculated for your products and postcode at checkout and shown, itemised, before you pay. Pickup from our Derrimut VIC factory is free.
More about event photo props
A selfie frame has one job: get your hashtag into other people's photos. Weddings, school formals, corporate events, brand activations, fundraisers — the frame is the cheapest piece of signage at the event and usually the only one that leaves with the guests.
Handheld or full-body?
Handheld frames are the ones people pick up, hold at arm's length and shoot with. They suit crowds, roving photographers and anywhere floor space is tight. Full-body frames stand on the ground and fit two or three people at once, which is what you want for a posed shot at an entrance or a step-and-repeat area.
Worth knowing before you size one: almost everyone shoots vertically for social. A frame that is wider than it is tall will be cropped on every platform it lands on, so if the photo is destined for Instagram or TikTok, a portrait or square aperture survives better than a landscape one.
Getting the hashtag right
The most common mistake is treating the frame as a poster. It is not read at leisure — it is read at a glance, in a photo, at a distance, often at a slight angle.
- Keep the hashtag off the edges. Anything within about 40mm of the aperture risks being cropped or covered by fingers.
- One short hashtag beats three long ones. If it cannot be read at arm's length, it will not be typed.
- Mind the contrast. Pale type on a pale frame vanishes against skin tones and bright venue lighting.
- Put the logo on the opposite side to the hashtag so a hand covering one corner does not take out both.
Which material?
Corrugated plastic is the standard choice — light enough to hold up for a long photo queue, stiff enough not to bend, and cheap enough to treat as single-event. For something reused across a season of events, foam board is heavier and holds a cleaner edge indoors.
Printing and delivery
Cut, printed and dispatched within 24 hours from our factory in Derrimut, Melbourne. Free factory pickup if you are local, shipping calculated at checkout Australia-wide, and a free artwork pre-flight check before printing — which on a cut-out shape is worth having, because that is where most files need adjusting.
Common questions
How fast can I get one?
Printed and dispatched within 24 hours of your artwork being approved.
Can you cut a custom shape?
Yes — frames, giant hashtag signs and big head cutouts are all cut to shape rather than left rectangular.
Single or double sided?
Most events only ever photograph one face, so single sided is the usual choice. Double sided is worth it where people approach a standing frame from both directions.
Will it survive an outdoor event?
Corrugated plastic is weatherproof and will handle a day outdoors comfortably. It is the wind rather than the rain that ends most of them, so weight or hold a large standing frame.
Can I order just one?
Yes. There is no minimum quantity on these.
Related: event and wedding signage, media walls, corrugated plastic signs.