Trade Show Setup & Pack-Down Guide

Home / Trade Show Guide / Setup and packing
TRADE SHOW GUIDE · SETUP

How to set up and pack down a trade show stand

Bump-in and bump-out rules from real Australian manuals, the order to build a stand, how to put up a pull-up banner, and a packing list you can tick off.

✓ Rules checked against exhibitor manuals · 19 Nov 2026

The four stages

Four stages of getting your stand built and taken down Before the show: order power and furniture, complete inductions, send insurance, book freight and dock times, label deliveries, test and tag electrical items. Bump-in day: arrive in your time slot with hi-vis vest and closed-toe shoes, build, move empty packaging to approved storage. Show days: no boxes on the stand, nothing removed early. Bump-out: wait for the move-out start time, pack, take everything away by the deadline. 1234 Before the showBump-inShow daysBump-out Order power, furnitureInductions, insuranceFreight + dock timesTest & tag items Arrive in your slotHi-vis vest +closed shoesBuild, store packaging No boxes on the standNothing removedbefore close Wait for themove-out timeOut by the deadline
Swipe sideways to see it all → A summary based on the event examples below. Your manual and organiser have your exact times and requirements.

This guide is about dressing a small shell scheme stand (walls, name sign and lights supplied by the organiser). Space-only stands are built by you or your builder and usually need plans approved well before the show. Bump-in is the time you're allowed in to build your stand; bump-out (or move-out) is when you pack it down. Both have fixed times in your exhibitor manual, and venues are strict about them.

Bump-in and bump-out rules from real manuals

Examples of event-specific requirements
Topic Rule Source
Arrival time The published exhibitor bump-in window was four hours (9 am–1 pm AEDT, 27 Oct 2026); builders had the day before, with stands ready at 1 pm and opening at 2.30 pm. The schedule was subject to change. AIEC 2026, ICC Sydney
Safety gear Hi-vis vest and closed-toe shoes are mandatory during bump-in and bump-out, or you're not allowed on the floor. AIEC 2026, ICC Sydney
Loading dock Book a delivery slot. Drop-off only (up to 15 minutes, driver stays with the vehicle), then park elsewhere — parking fees apply. AIEC 2026, ICC Sydney
Hand-carry and trolleys AIEC: hand-carry or the trolley types it shows; larger trolleys use the dock. AusRAIL: hand-carry small items from the BCEC car park; a few small trolleys at the Information Desk. AIEC 2026; AusRAIL 2026 (BCEC)
Forklifts AIEC: book in advance through Expo Freight; charges apply. AusRAIL: BCEC doesn't provide forklifts; ask GEL Events for a quote. AIEC 2026; AusRAIL 2026
Receiving deliveries The organiser and BCEC won't sign for your goods; arrange your own authorised person to receive and sign. Every package needs the correct delivery label or it can be refused. AusRAIL 2026 (BCEC)
Induction All exhibitors and contractors must complete the BCEC safety information before coming on site (deadline 6 Nov 2026). AusRAIL 2026 (BCEC)
Insurance At least $10 million public liability, with a copy sent to the conference managers — or entry is denied. AusRAIL 2026 (BCEC)
Boxes and storage No storage for boxes or packing in the hall or loading dock, and none on the stand. A dock booking isn't a storage booking — arrange off-site storage or your freight company to hold empties. AIEC 2026
Electrical items Portable electrical items and leads had to be tested and tagged — SPLASH! included laptop cords and phone chargers. Double adaptors were banned. AusRAIL 2026 (BCEC); SPLASH! 2026
Cables and power Cables crossing walkways need a proper cable-management system such as cable trays or taped-down matting, with hazard marking. Exhibitors may not open floor power pits. SPLASH! 2026
Move-out timing Show closed 3 pm on the last day. Shell and walk-on stands: product removal 3.30–10 pm (once visitors had cleared and it was safe), fully out by 10 pm. Loading dock from about 5.30 pm, booked slots only. Space-only stand dismantling couldn't start until 6 pm. Fine Food Australia 2026, MCEC Melbourne
Staying on the stand At least one staff member rostered on during move-out while goods remain. Remove all floor tape and rubbish; the manual says leaving waste means extra cleaning charges. AusRAIL 2026 (BCEC)

The order to set up your stand

One suggested order to set up a 3 by 3 metre shell scheme stand Top view of a stand. 1: back wall graphics first, while the floor is empty. 2: media wall or pull-up banners, placed to suit your stand plan. 3: table or counter with its cover, kept within your stand space. 4: power, screens and lights; test everything. 5: products and brochures. 6: move empty packaging to the storage your event allows. AISLE 1 22 3 4 5 1 Back wall graphicswhile the floor is still empty 2 Media wall, pull-upswhere your stand plan puts them 3 Counter + table coverfeet and cover inside your stand space 4 Power, screens, lightstested and tagged; test them all 5 Products and brochuresmain product where people can see it 6 Store empty packagingwhere your event allows
Swipe sideways to see it all → One possible order for a shell scheme stand, our suggestion. Working from the back wall forward helps you avoid stepping around finished work. Follow your approved stand plan.

Before you open: safety check

Exits and fire equipment clear. Nothing in the aisle. Displays stable. Cables covered or routed out of the way. Any damaged lead or plug out of use.

What needs a contractor

You can plug in tagged equipment. Electrical installation, rigging, hanging signs and structural work are done by the event's approved contractors. Plan where power comes in before placing furniture.

Attaching graphics to shell scheme walls

What you can use to attach graphics to shell scheme walls Allowed at Integrate 2026: Blu Tack, double-sided tape and 3M removable products. Not allowed: pins, staples, screws, nails, bolts, glue or paint. Damage is charged. ✓ Allowed✗ Not allowed Blu TackDouble-sided tape3M removable products Pins · staples · screwsNails · boltsGlue · paint Confirm fixings and loads with the stand builder."Charges will apply to ALL damage caused."
Swipe sideways to see it all → From the Integrate 2026 shell scheme specifications, which say not to assume anything can be attached and to ask the stand builder (ExpoNet) for mounting advice. Rules differ by show and builder.

Panel sizes matter

Integrate 2026 shell wall panels are 974 mm wide × 2412 mm high. That's the panel, not the artwork size — confirm the visible area and artwork specs with your stand builder. See panel sizes by show.

Easier: freestanding displays

A media wall or pull-up banner stands on its own, so you don't fix anything to the shell walls. You're still responsible for any damage.

How to put up a pull-up banner

1. Take the base out of the bag and lay it flat. Swing out the feet if it has them.
2. Join the pole sections and slot the pole into the base.
3. Hold the top rail with both hands and lift the print slowly. Don't let go.
YOURBRAND
4. Hook the top rail onto the pole.

Packing away is the same in reverse: unhook the rail and guide the print all the way down by hand rather than letting it spring back. Models differ, so follow your banner's own instructions — pull-ups from Vivid Ads have a setup-instructions download on the product page.

Need a new print for your old stand?

Media walls, fabric banner stands and flags can take a new printed graphic. Some pull-up banners can too, but the roller is under tension — contact Vivid Ads with your original order number and base details first so we can confirm it fits.

Banner problems?

Won't stay up: check the pole is fully seated in the base and the rail is hooked on. Won't roll back: don't force it or adjust the spring yourself — contact the supplier.

Packing list (tool)

0 of 26 packed. Ticks are saved on this device only.

    Stand and displays

  • Tools and fixings

  • Power and tech

  • People and paperwork

  • Selling

  • Comfort and clean-up

Our suggested list. Add anything your manual requires.

Packing down (bump-out)

Wait until you're allowed

Don't pack or dismantle until the organiser permits it, and check separate times for product removal, dismantling and dock access. At Fine Food Australia 2026 the show closed at 3 pm, product removal began at 3.30 pm and the dock opened about 5.30 pm.

Valuables first, someone stays

Pack laptops, screens and stock first, and keep someone on the stand until everything has gone.

Pack graphics clean and dry

Guide pull-up prints down slowly. Roll fabric graphics loosely or fold along their original folds, and let damp graphics dry before storing.

Take everything, leave it clean

Shell stands at Fine Food Australia 2026 had to be fully moved out by 10 pm. AusRAIL 2026's manual says leaving waste means extra cleaning charges, and that the organisers take no responsibility for goods left behind.

Plan the trip home

Book collection and return labels before the show, and ask when empty cases come back. The hired shell walls are removed by the stand builder — you only take your own things.

VIVID ADS DISPLAY OPTIONS

Displays that are quick to set up

Photos are Vivid Ads product images. Every printed order includes a free digital proof.

Questions people ask

What are bump-in and bump-out?

Bump-in is the set time you're allowed into the venue to build your stand. Bump-out (move-out) is when you pack it down and take it away. Times are in your exhibitor manual.

How long does it take to set up a trade show stand?

It depends on your stand. Your manual gives the access window — AIEC 2026's exhibitor window was four hours, which is an access time, not how long a build takes. Do a practice setup at your office, time it, and add time for unloading, testing and surprises.

What do I need to order before the show?

Check whether power, furniture and internet are included in your package, and order anything missing. For example, Integrate 2026's standard shell scheme had two LED spotlights per 9 m² but no power supply for your equipment ("No Power is included"); power had to be ordered from the official electrician.

Can I stick things on shell scheme walls?

Only with the fixing products and methods approved for your event's walls. For example, Integrate 2026 allowed Blu Tack, double-sided tape and 3M removable products and banned pins, staples, screws, nails, bolts, glue and paint. Damage is charged.

Do I need to test and tag my laptop charger?

At the events we checked, yes. SPLASH! 2026 required all electrical leads, including laptop cords and phone chargers, to be tested and tagged, and banned double adaptors.

How do I set up a pull-up banner?

Lay the base flat, join the pole and slot it in, lift the print slowly by its top rail and hook the rail onto the pole. Pack it away in reverse, guiding the print down by hand.

Can I replace the graphic on my pull-up banner?

Sometimes. It depends on the base and roller, which is under tension. Contact your supplier with the original order details before ordering a replacement print.

Sources

What Source Checked
Bump-in times, loading dock, safety gear, storage, forklifts AIEC 2026 logistics and bump-in (ICC Sydney) 19 Nov 2026
Move-out times Fine Food Melbourne 2026 key dates and times (PDF) 19 Nov 2026
Move-out, cleaning, staff AusRAIL bump-out 19 Nov 2026
Induction AusRAIL exhibitor induction 19 Nov 2026
Insurance AusRAIL public liability insurance 19 Nov 2026
Shell walls and fixings Integrate 2026 shell scheme specifications (PDF) 19 Nov 2026
Test and tag, double adaptors, cables AusRAIL exhibitor manual · SPLASH! 2026 electricals 19 Nov 2026
Deliveries, hand-carry, forklifts (BCEC) AusRAIL freight and delivery 19 Nov 2026
Published and funded by Vivid Ads, an Australian signage manufacturer. Editor: Zulfeqar Ahmed, CEO. Rules come from the sources cited and change by show and year; check your current manual and organiser updates, and if instructions conflict, ask the organiser in writing. Setup order and packing list are our suggestions. How we check · Found a mistake? Email sales@vividads.com.au. Change log: 19 Nov 2026 — first published; same day: post-publish review fixes (move-out timing, insurance, storage, safety check, contractor scope, replacement graphics).