Table Throws

Do the table throws shrink after washing?

Our table throws will only shrink by up to 5% if you carefully follow the washing instructions mentioned above.

Do you offer Table Throws in black colour?

  Our Table Throws are made on a white piece of cloth that can be coloured or printed in any colour or pattern of your choice. The choice of colours, logos and patterns rests with the clients.

How can remove wrinkles from my Table Throws made from polyester?

  Take your iron and set it to the lowest heat setting. Place the wrinkled fabric on the ironing board and use steam coming from the iron to remove wrinkles. Don’t touch the fabric with iron, simply use it as a steamer to clear away any wrinkles and creases. The fabric must also be covered by pressing cloth to keep it safe from direct heat.

Are your Table Throws fire-retardant?

Yes, our Table Throws are flame-retardant.

Do you offer Table Throws with zippers?

  Some of our Table Throws come with zippers at the back. This allows easy access to things stored under the table.

How do I take care of my Table Throws?

You can wash your Table Throws and covers in  a washing machine separately from other clothes. Use cold water, mild detergent and gentle cycle. Only use non-chlorinated bleach. Table Throws can also be placed in dryers. Dry cleaning is not advised as it may remove ink from the cloth. You may also iron the Table Throws using iron on low heat.

Do Table Throws come in a carrying case?

  All of our Table Throws come in a drawstring bag. This makes it easy to carry from one place to another.

How do three-sided Table Throws stay put on the table?

There is a small 4-inch overhang at the back of our three-sided Table Throws. The back corners are also sewn together to keep the table throw in place.

What materials are used for the making of table runners, throws and covers?

We use 100% premium polyester to make our table runners, throws and covers. This gives them a neat and professional look.

Add 5 mm bleed all around.

  To allow slight cutting differences in production, always add a bleed of 5 mm bleed around all edges of your design. Make sure background images, colours, pictures and layouts extend into the bleed area to avoid leaving white lines as a result of cutting variations. Best to submit your file with printer's marks and  crop marks.

Convert fonts to outlines or embed all the fonts.

Make sure you convert fonts to outlines or embed all the fonts when saving it to PDF.

Fonts should be at least 12 pt.

  All Fonts used in your artwork should be at least 12 pt.

Check your artwork on overprint.

  Ensure no elements in your artwork are set on overprint. Unless you want this effect in your design. The degree of transparency in printing process depends on many factors like  paper, ink and the printing method used.

Use color mode as CMYK .

  Prepare all your files using CMYK color mode. Make sure the color mode is not set to RGB. If you are not sure of the colour mode of your file, we can always convert this for you. Its important to keep in mind this can cause the colours to change from the original artwork file.

Resolution of over 150 dpi.

Make sure the resolution of the images and graphics in your artwork are over 150 dpi to make images look crisp.

Keep 10 mm safety margin all around.

  Keep all images and text  at least 10 mm inside from the edge of the finished size.

Save your file(s) in non-editable, print-ready format.

Save your files in a non-editable, print-ready file formats (PDF , AI, EPS, JPG, PNG). Deliver your files in one layer: the background layer.