Trade show display and stand sizes in Australia

Home / Trade Show Guide / Display and stand sizes
TRADE SHOW GUIDE · SIZES

Trade show display and stand sizes in Australia

Pull-up banners, shell scheme walls, stand heights, table covers and how big your text needs to be — with figures taken from Australian exhibitor manuals and suppliers.

✓ Figures checked against the sources listed at the bottom · 18 Nov 2026

850 × 2000 mm
the most common pull-up banner size sold by Australian suppliers
3 × 3 m
a common shell scheme stand; 3 × 2 m and 6 × 3 m are also offered
2.4–2.5 m
typical shell scheme wall height; panels are about 950–990 mm wide, not a full 1 m
~1830 × 760 mm
a 6 ft folding table top; tables stand about 735–740 mm high

Pull-up banner sizes

Most Australian suppliers sell an 850 mm wide by 2000 mm high banner as their standard. Narrower and shorter banners suit counters and tight stands; wider ones suit a back-of-stand message.

Pull-up banner sizes offered by five Australian suppliers (width × height, mm)
Supplier Sizes listed
Snap 850 × 2000, 1200 × 2000, 845 × 2100, 1195 × 2100
Easy Signs 850 × 2000, 850 × 1500, 850 × 1400
Kwik Kopy Standard 850 × 2000; up to 1700 × 3000
Officeworks 841 × 2000
Slimline Warehouse 850 × 2000

From each supplier's product page, checked 18 Nov 2026. Vivid Ads' own sizes are in the labelled display options section below.

Banner heights compared with a shell scheme wall Scale drawing: banners 1400 mm, 2000 mm and 2100 mm high beside a 2400 to 2500 mm shell scheme wall line and a 1700 mm tall reference figure. Shell scheme wall ≈ 2500 mm 600 × 1400 800 × 2000 850 × 2000mostcommon 1000 × 2000 850 × 2100 1.7 m
Drawn to scale (1 px = 10 mm). Heights shown are the sizes suppliers list. Some list the graphic height, others the overall height with the base — check which before you compare.

Which size? Our suggestions

  • ~1400 mm high: counters, tabletops, low ceilings, shopping-centre stands
  • 850 × 2000 mm: the all-rounder — tall enough to read over people's heads
  • 1000 mm+ wide: a single back-of-stand message or a wider logo
  • Two banners side by side can flank a table on a 3 m stand

Check before you order

  • Your exhibitor manual: banners on shared walls may need to be single-sided or set back
  • Where the banner stands: it must not block the aisle or your neighbour
  • Keep logos and key words in the top two-thirds, above table and head height

Shell scheme stand sizes and what's included

A shell scheme is a pre-built stand with walls, a name board and lights. Sizes and inclusions are set by each show — the same "3 × 3 m" can come with or without power or flooring.

What five Australian shows include in a standard shell scheme
Show (venue) Size offered Walls Power Lights Floor
Integrate 2026 (ICC Sydney) 3 × 3 m; 2440 mm overall height White laminated panels Not included 2 LED spotlights per 9 m² Black carpet tiles
Fine Food Melbourne 2026 Per spec sheet 2500 mm high Not included 2 × 120 W LED spotlights per 9 m² Carpet tiles
PAX Aus 2026 (MCEC) Per manual 2.5 m flush walling 1 × 4 amp point 2 × 120 W per 9 m² Carpet tiles
Sydney Build 2025 Per manual 2.5 m Octanorm, 990 mm panels 1 × 4 amp outlet Included Included; plus trestle table and 2 chairs
AIEC (ICC Sydney) 3 × 2 m (6 m²) Shell walls 1 point per 6 m² 2 spotlights per 6 m² Not included
What a 3 by 3 metre shell scheme stand looks like Front view of a shell scheme stand: three wall panels about 950 to 990 mm wide, walls 2.4 to 2.5 m high, a name board across the front with spotlights, about 2080 mm clear height under it, and an inside width of about 2950 mm. Your printed panel graphics NAME BOARD (FASCIA) ≈ 2080 mm clear under it wall 2.4–2.5 m 3 m stand — about 2950 mm inside panel ≈ 950–990 mm
Illustration, not to scale exactly. Measurements from the Integrate, EXA, Fine Food and Melbourne Royal Show manuals in the sources. Spotlights shown in yellow.

Wall height

2.4 m to 2.5 m. Integrate's overall height is 2440 mm; Fine Food and Sydney Build walls are 2500 mm.

Panel print size

Varies by show, and the physical panel differs from the visible area. Integrate: 974 × 2412 mm panels. Fine Food Sydney: 970 × 2360 mm. EXA (Perth): 968 × 2358 mm panel, 950 × 2340 mm visible. Print to the artwork size your spec sheet gives.

Inside size

Smaller than the stand size: Melbourne Royal Show's 3 × 3 m measures 2950 × 2950 mm inside.

Name board

Usually a character limit, e.g. 30 uppercase characters including spaces. EXA's fascia shows 2930 × 220 mm, with 2080 mm clear height beneath.

Always print to the panel size in your show's spec sheet — it changes between contractors. Sources listed below.

Space-only stands: how tall can you build?

There's no national rule. Most manuals set a height above which you need extra permission, a hard maximum, and setbacks for tall walls. Separately, many shows (Integrate, AusRAIL, AIEC) require every space-only design to be approved, whatever its height.

Height rules in six Australian exhibitor manuals
Show (venue) Extra permission above Maximum Other rule
Integrate (ICC Sydney) 2.5 m 5 m Design submitted 28 days before the show
EXA (Perth) 2.5 m With organiser permission —
Fine Food Sydney — 5 m Banners on shared perimeters single-sided or set in 1 m
AusRAIL (Brisbane) — 4 m Walls over 2.5 m set back 0.5 m from booth edges (AusRAIL 2026)
PAX Aus (MCEC) 2.4 m Not stated; stands 3.5 m+ need an approved SWMS/JSA Signage over 2.4 m set back 1 m from neighbours
AIEC (ICC Sydney) 2.4 m Not stated; over 3 m needs engineer certification and/or detailed drawings Discuss anything over 2.4 m with the organiser

Rule of thumb: plan anything over 2.4 m as needing extra permission, submit your design for approval, and check setbacks before ordering tall graphics.

Will a fabric back wall fit my stand?

Freestanding fabric walls are commonly about 2.3 m high and 1.5 m to 6 m wide. Two checks matter:

Width

A "3 m" wall is often 2980 mm wide — wider than a shell scheme's inside width (2950 mm in the Melbourne Royal Show example). In a 3 × 3 m shell scheme, a 2 m wall or graphics on the shell panels themselves may fit better. Space-only stands have no shell walls to work around.

Height

A 2.3 m wall sits under a 2.4–2.5 m shell wall at the back. Don't place it under the front fascia: EXA lists only 2080 mm clear height beneath it.

Will a fabric back wall fit inside a 3 by 3 metre shell scheme? Two top-down plans. Left: a 2980 mm wall does not fit a 2950 mm inside width. Right: a 1980 mm wall fits with room either side. ✗ 2980 mm wall wall is 30 mm widerthan the 2950 mm inside aisle ✓ 1980 mm wall fits, with room for abanner either side aisle
Top-down view. Black = shell walls; coloured bar = fabric back wall. Inside width from the Melbourne Royal Show manual — measure yours.

Table and table cover sizes

Folding table sizes from Australian retailers (length × width × height)
Table Typical size Cover size to order
4 ft 1220 × 610 × 711 mm 4 ft cover
6 ft (most common at shows) 1828–1838 × 750–762 × 736–740 mm 6 ft cover
8 ft 2438–2440 × 762–767 × 735–737 mm 8 ft cover

From BuyDirectOnline, Officeworks, BCF, Slimline Warehouse and TFH Hire, checked 18 Nov 2026. Hire tables vary — measure the one in your package (Sydney Build includes a trestle table).

Fitted and loose table covers compared Front views: a fitted cover with straight crisp sides, and a loose throw that drapes to the floor with folds. FittedYOUR LOGOtight, crisp edges — logo stays flatLoose throwYOUR LOGOdrapes and folds — fits more tables
Illustration. Both come with an open back (sit behind it, store stock underneath) or a closed back (finished on all sides).

Fitted or loose?

Fitted covers sit tight with crisp edges, best for a logo on the front. Loose throws drape and fit a wider range of tables.

Open or closed back?

An open back lets you sit behind the table and use the space underneath for stock. A closed back looks finished from every side, e.g. on a corner or island stand.

How big should the text be? (tool)

Letter height needed at different viewing distances A visitor at 3, 6 and 9 metres from a banner. Comfortable capital-letter heights grow from about 25 mm at 3 m to 50 mm at 6 m and 75 mm at 9 m. AAA 3 m → 25 mm6 m → 50 mm9 m → 75 mm comfortable capital-letter height (25 mm per 3 m)
Illustration of the comfortable rule; the AS 1428.2 minimums are lower — use the tool below.
Minimum (Australian Standard AS 1428.2)12 mmreference minimum letter height — not a readability guarantee
Comfortable (sign industry rule)33 mm25 mm per 3 m — easier at a glance

Letter height means capital-letter height. AS 1428.2 values from Table 2 (via the Australian Network on Disability), between listed distances we use the next distance up. The comfortable rule is a common sign-industry guide, not a standard.

Example: a company name read from across a 6 m aisle should be at least 20 mm high, and about 50 mm to read comfortably.

Artwork basics for printed displays

Colour

Design in CMYK, the colour mode presses print in.

Text

Convert text to outlines and embed all images so nothing goes missing.

Size

Start from your printer's template for the exact size; it shows the safe area to keep text inside.

File

PDF is safest. Check whether your printer adds bleed or wants it in the file.

These match Vivid Ads' artwork instructions; other printers' requirements can differ.

VIVID ADS DISPLAY OPTIONS

Our display sizes and prices

Vivid Ads sizes and live website prices for one unit (incl. GST), checked 18 Nov 2026
Product Sizes (W × H) Price for the size listed
Pull up banner (frame, print, bag) 600 × 1400 · 800 × 2000 · 1000 × 2000 mm $79 · $89 · $99
Premium pull up banner 850 × 2050 mm $125.50
Fabric banner stand (double-sided) 850 × 1400 · 850 × 2000 mm $185.30 (850 × 2000)
Stretch fabric media wall 1500 · 1980 · 2980 · 3980 · 5980 × 2300 mm $249 · $249.20 · $379 · $449 · $564 (single-sided)
Table cover 4 ft · 6 ft · 8 ft; fitted or loose; open or closed back $149 (6 ft fitted)
Shell scheme fabric graphics Made to your panel size Quoted

Prices change — the product page shows the current price. Artwork templates for each size are on the product pages. Every printed order includes a free digital proof; most orders of 1–15 items are produced in 1 working day after proof approval, plus delivery.

Questions people ask

What is the standard pull up banner size in Australia?

850 mm wide × 2000 mm high is the size most Australian suppliers list as standard. 800 × 2000, 1000 × 2000 and shorter 1400–1500 mm versions are also common.

What size is a trade show booth in Australia?

3 m × 3 m (9 m²) is common for shell scheme stands, with 3 × 2 m, 6 × 3 m and larger multiples offered. Your show's floor plan sets the options.

How tall are shell scheme walls?

2.4–2.5 m in the manuals we checked. Panels are about 950–990 mm wide, so check the exact print size in your spec sheet.

How high can I build on a space-only stand?

It depends on the show: commonly 2.4–2.5 m before extra permission is needed, with maximums such as 4 m or 5 m and setbacks for tall walls. Many shows also approve every space-only design.

What size table cover fits a 6 ft table?

One made for a 6 ft table — check the table size it is made for against yours, as 6 ft tables vary (about 1828–1838 mm long). A 6 ft folding table is about 1830 × 760 mm on top and 740 mm high; choose fitted for a crisp look or loose for flexibility.

How much does a pull up banner cost?

At Vivid Ads, from $79 for 600 × 1400 mm to $99 for 1000 × 2000 mm including frame, print and bag (incl. GST, checked 18 Nov 2026). Prices vary between suppliers and by quality.

How big should text be on an exhibition banner?

AS 1428.2 Table 2 gives 25 mm as the minimum letter height for 8 m. For comfortable reading allow about 25 mm per 3 m of distance, and test a full-size print at the real distance — contrast, font and lighting matter too. Use the tool above.

Sources

What Source Checked
Integrate shell scheme specs and height rules Integrate 2026 shell specs (PDF) · space-only rules 18 Nov 2026
Fine Food shell and space-only specs Melbourne 2026 shell (PDF) · Sydney shell (PDF) · space only (PDF) 18 Nov 2026
PAX Aus shell and space-only rules shell · space only 18 Nov 2026
Sydney Build shell packages Sydney Build 2025 (PDF) 18 Nov 2026
AIEC booth information AIEC 18 Nov 2026
EXA panel and fascia sizes, height rules EXA specs (PDF) · space only 18 Nov 2026
AusRAIL space-only rules AusRAIL manual 18 Nov 2026
Melbourne Royal Show internal stand sizes MRS 2026 manual (PDF) 18 Nov 2026
Table sizes BuyDirectOnline · Officeworks · BCF · Slimline · TFH Hire (PDF) 18 Nov 2026
Letter height (AS 1428.2 Table 2) Australian Network on Disability; 25 mm per 3 m rule: The Sign Shed 18 Nov 2026
Pull-up banner sizes Snap · Easy Signs · Kwik Kopy · Officeworks · Slimline 18 Nov 2026
Published and funded by Vivid Ads, an Australian signage manufacturer. Editor: Zulfeqar Ahmed, CEO. Figures come from the sources above and can change — your show's exhibitor manual and spec sheets always win. How we check · Found a mistake? Email sales@vividads.com.au. Change log: 18 Nov 2026 — first published; height-permission wording, panel sizes, text-size and table-cover answers clarified after fact-check; shell scheme, back-wall fit, table cover and text-distance illustrations added.