Footpath A-Frame & Trading Permits: Melbourne Councils
Footpath A-frame and footpath trading permits: Melbourne councils compared
Facts confirmed by Zulfeqar Ahmed, CEO, Vivid Ads · Printing in Melbourne since 2007 · Updated 21 Nov 2026
Do you need a permit for an A-frame, flag or goods display on the footpath outside your shop? Ten Melbourne councils compared side by side, the Victorian model conditions, and how to check your own council.
✓ Key rules link to official planning scheme, council or government sources, read on 20 Nov 2026 (each source's own date is shown where it has one). General information, not legal advice. Rules change, so check with your council before you place a sign.
Quick answers
Melbourne councils we checked require a permit for a business A-frame on the public footpath (listed in the table below).
sign is the common limit; it may count per business, premises or whole building, and exceptions need approval.
published A-frame height limits in the table range from 1 m (Yarra's includes the legs) to 1.2 m (Port Phillip).
public liability cover, depending on the council, often with the council noted on the policy.
Outside Melbourne? Our A-frame guide compares Sydney, Brisbane, Adelaide, Perth, Canberra and Hobart, and signage rules in other states shows where to check.
1. How councils divide the footpath
Most Victorian councils split the footpath into zones and only allow trading items, including A-frames, in the middle "trading zone". That keeps a clear path for pedestrians, including people using wheelchairs or a cane, and a buffer for people getting out of parked cars.
2. The Victorian model conditions (November 2025)
The Victorian Government's Guide to Footpath Trading Permits (Word version) gives councils "model, risk-based local law requirements", co-designed with Victorian councils, to adopt "as relevant". It is non-binding guidance unless your council adopts it: an example of model conditions councils can adopt or adapt. For A-frames and flags it says:
"You may place either one A-frame sign or one tear drop banner/flag in your trading zone if: the A-frame sign is no higher than 1.2m and no wider than 0.9 m; the tear drop banner or flag is not reliant on, or physically fixed or attached to any council infrastructure; there is clear and unobstructed pedestrian access on the footpath."
The sign or flag must also be "secure and stable, adequately weighted down or secured appropriately against wind", must not be a hazard to pedestrians "including pedestrians with disability", and is "removed from the footpath at the close of trade each day, if damaging weather is predicted, or in the event of a trading zone interruption".
The model trading zone leaves 1.5 m for pedestrians (footpaths 2.5–3.5 m wide) or 1.8 m (wider than 3.5 m); 1 m between neighbouring businesses; 0.6 m from the kerb beside standard parking, 0.7 m beside a loading zone and 1.5 m beside an accessible parking bay; 0.5 m from street lights, tree pits, trees or plants, electricity poles and meter boxes; 1 m from traffic poles and lights, tram and bus stops, bicycle stands, fire hydrants, public seating, bins, parking ticket machines or meters, phone boxes and service pits; and 2 m from an intersection, corner or pedestrian crossing. The 1 m between neighbouring businesses is 0.5 m on each side of the shared property line. Goods displays are limited to 1.5 m high, 1.5 m long and 0.8 m deep.
Goods displays and A-frames are often separate permit items: an A-frame approval doesn't necessarily let you put merchandise on the footpath.
3. Ten Melbourne councils compared
What each council publishes about A-frames and other footpath advertising signs. "Not published" means we couldn't find the figure on the council's own page; it doesn't mean there is no limit.
| Council and source | Permit? | Size and number | Placement and conditions | Fees and insurance |
|---|---|---|---|---|
|
City of Melbourne Street signage · ABLIS fees |
Permit | Up to 1 m wide × 1 m high; one board in front of a building, and only one business in a building can hold the permit | at least 2 m from the building line, 0.5–1.5 m from the kerb; footpath beside the entrance at least 3.5 m wide; not within 9 m of an intersection; permit details visible on each side of the board; not transferable; no boards on parts of Swanston, Collins, Elizabeth, Bourke and Lygon streets or Southbank Promenade | 2026–27 on ABLIS: $255.50 application + $776.70 licence; the street signage page asks for $20 million public liability. Full detail in our A-frame guide |
|
Yarra Footpath Trading Policy 2026 |
Permit | No more than 600 mm wide and 1000 mm high "including legs"; maximum 1 (a business with two separate frontages may apply for up to 2) | No footpath trading on footpaths under 2.5 m wide. Walkway at least 1.5 m from the shopfront (footpaths under 3.5 m) or 1.8 m (3.5 m or more); 0.5 m access gap at each side of the frontage, and 1 m every 3 m for large trading areas; kerbside zone at least 0.4 m from the kerb (0.7 m at a loading zone, 1.5 m at an accessible parking bay). No inflatable, portable electric, flag or banner, revolving or flashing signs without specific written approval | Flat application fee plus a permit fee per advertising frame; $20 million public liability with the council listed as an interested party |
|
Port Phillip Footpath Trading Guidelines 2024 · A-board permit |
Permit | "a maximum of 1.2m high and 0.7m wide"; one per premises | Outside your premises during opening hours; in the trading zone beside the kerb zone, not in the pedestrian zone; not fixed to the footpath or public assets; weighted against wind (water or sand base, discs or sandbags). The permit page says the council "does not permit the use of flags or banners, such as teardrop banners" | Application fee, then permit fees for the 1 July–30 June year (or part of it); $20 million public liability with the council as an interested party; the council says to allow up to ten business days for a decision. The older A-board fact sheet (updated December 2019) gave 1.0 m × 0.7 m; the 2024 guidelines are newer |
|
Stonnington Apply for a footpath trading permit |
Permit | No larger than 1 m high and 750 mm wide; one advertising sign per business | At least 300 mm from the back of the kerb within the trading zone; kerb side directly in front of the premises; generally not supported on street corners; neighbour's written consent to use their frontage; upstairs businesses need the ground-floor business's consent | An annual fee per board: the page we read showed $385, with invoices for 1 July 2025 to 30 June 2026, so confirm the current fee and renewal date with the council. A public liability certificate covering at least $20 million may be required |
|
Moonee Valley Footpath trading permit |
Permit | Assessed against the council's Footpath Trading and Parklet Guidelines | Pedestrian zone 1.2 m (1.8 m on Puckle Street, Union Road, Racecourse Road and Keilor Road); kerb zone 0.5 m; 1 m between neighbouring trading zones, and a 1 m gap in the middle of a trading zone longer than 10 m | "Advertising signs, small structures of displays": $180, fees from 1 July 2026 (page updated 12 October 2026) |
|
Merri-bek Footpath trading permits · Footpath Trading Guidelines |
Permit | Guidelines: no more than 1 m high and 0.6 m wide; "Only one advertising sign per premises will be considered unless the business is located on a corner" | Guidelines: no footpath trading on footpaths under 2.9 m wide. Hours 9 am–11 pm in commercial areas and 9 am–10 pm in residential areas or within 30 m of one, or as your planning permit allows; no site plan needed for an A-board-only application; A-boards that breach the Tobacco Act 1987 won't be approved | "A-boards are $143* each" (*subject to change, pro-rata fees apply) plus a $67.70 new application inspection fee; $10 million public liability; permits valid until 31 August each year |
|
Wyndham Footpath trading permit · Policy and Guidelines |
Permit | Policy: no more than 0.7 m wide or 1 m high; one per premises | Policy: not along the building line; at least 0.75 m from the kerb; 1.8 m clear pedestrian corridor; outside the premises it relates to while open (the current application page allows a sign in front of a neighbouring business with the owner's written permission); no permits in residential zones; no spinning flags, banners, streamers, flashing or inflatable signs | Application page: $340 new application fee and $147 per advertising sign; permits renew every year on 31 August. Policy: $10 million public liability with a principal's indemnity extension. The policy document is dated November 2015, so confirm the current conditions with the council |
|
Maribyrnong Commercial street furniture and footpath signage · Application pack 2026–27 |
Permit | "The regular maximum dimensions of all portable advertising signs should be 1 metre in height, and 0.6 metres in width"; "Unless otherwise permitted, only one 'A' Board per business" | A clear footpath at least 1.5 m wide from the property line; not within 600 mm of the kerb unless an authorised officer allows it; apply with a diagram showing dimensions and distances from kerbs, street signs and bins | Application fee; public liability of at least $10 million (2026–27 application pack, under the Community Amenity Local Law 2025) |
|
Hobsons Bay Footpath Trading · Code of Practice (version 003) |
Permit | A-boards no more than 1 m high or 0.7 m wide; "Only one sign per premises will be permitted" | Only within the trading zone next to the business, never in the pedestrian zone. A permit is needed "to place advertising signs, display of goods, tables with chairs, heaters, screens"; failing to get one is an offence under the Community Local Law | $20 million public liability; permits run to 31 August and may be renewed annually (code approved 1 July 2025) |
|
Monash Footpath Trading & Outdoor Advertising · Footpath Trading and Access Policy 2024 |
Permit | Policy: portable advertising signs "must not exceed 1.0 metres in height or 600mm in width" | Policy: only in the trading zone in front of the premises; a permit is only considered where the footpath is wider than 2.4 m; pedestrian zone at least 1.8 m (no less than 1.5 m in exceptional circumstances); kerbside zone at least 0.6 m. Apply with the Signs and Goods Application form and a layout plan or photos | Certificate of currency for public liability of at least $20 million per single event (Business Application Guide) |
Not your council? Search the Australian Government's ABLIS (Australian Business Licence and Information Service) for "permit to place signs" plus your council's name, or look for "footpath trading", "A-board" or "outdoor advertising" on your council's website.
4. Height and width limits compared
5. How to apply: what councils usually ask for
- Find the right permit. It's often called a footpath trading, A-board, advertising board or "permit to place signs" permit, under the council's local law.
- Measure your footpath and frontage. Note the footpath width, the distance to the kerb, and nearby poles, trees, bins, seats, bus or tram stops and intersections.
- Draw a simple site plan showing where the sign will stand (Merri-bek doesn't need one for an A-board-only application; Maribyrnong, Wyndham and Port Phillip ask for a plan or diagram).
- Get the sign's dimensions, including the frame's overall open height, width and depth, before you apply.
- Get your public liability certificate of currency at the level the council asks for, with the council noted as an interested party or given an indemnity if required.
- Pay the fee and wait for approval before placing the sign. Port Phillip, for example, says to allow up to ten business days. Display any permit details or sticker the council asks for.
6. Our A-frame dimensions: what is confirmed
What we can tell you
- A Frame Signs and Budget A-Frame Signs use 600 mm wide × 900 mm high boards (budget versions also come in 450 × 900 and 450 × 450 mm)
- The dimension drawing for the metal frame labels it 600 mm W, 900 mm H and 670 mm D; the 900 mm label runs along the sloping side, so it isn't the assembled vertical height
- The metal A-frame comes with two boards, each printed on one side, facing opposite directions, so it reads both ways along the footpath
What to check with us first
- The metal frame's assembled vertical height and maximum width including the feet aren't published yet
- Where a council caps the sign at 1 m high including legs (Yarra) or 600 mm wide, ask us for the measured size before you apply
- On a narrow footpath, a sign on your building or window may suit better, subject to planning rules and your landlord's consent
7. Footpath sign checklist
- Your council's current permit page and conditions read
- Permit applied for and approved before the sign goes out
- One sign (or the council's limit) outside your own premises
- Overall size, including legs, within the council's limit
- Clear walkway and kerb gap measured on your footpath
- Away from intersections, crossings, stops, hydrants and street furniture
- Weighted against wind, not tied to poles or trees
- Brought in at close of trade and in damaging weather
- Public liability certificate current, council named if required
- Permit sticker or details displayed if required
Footpath signs we print

A Frame Signs
Metal frame + two 600 × 900 mm boards: A$125

Budget A-Frame Signs
600 × 900 mm: A$75

Printed Signs ONLY (A-Frame)
Replacement 600 × 900 mm board: A$45 each

Feather Flags
Small 2.5 m, single-sided, ground spike: A$99; check your council allows flags and their height
Vivid Ads prices include GST for one item in the configuration shown, checked on our website 20 Nov 2026; you supply print-ready artwork. Every printed order includes a free digital proof; design is a paid option. For most products, 1–15 items are made within 24 hours (1 working day) once the proof is approved and payment has cleared by 3 pm Melbourne time on a working day; larger quantities and some products take longer (see the product page), and delivery time is extra. Delivery is calculated at checkout, or collect free from Gate 2, 90 Australis Drive, Derrimut VIC, 9 am–5 pm on working days. Hardware such as A-frame frames and flag poles carries a 12-month hardware warranty, as shown on the product page, in addition to your Australian Consumer Law rights. We print your sign; you are responsible for any permit and for where and how it is placed. Ground spikes only suit soft ground; on a footpath a flag needs a weighted base. Photos are Vivid Ads product images.
Questions about footpath sign permits
Do I need a permit for an A-frame outside my shop in Melbourne?
In every Melbourne council we checked, yes, for an ordinary business A-frame on the public footpath. City of Melbourne, Yarra, Port Phillip, Stonnington, Moonee Valley, Merri-bek, Wyndham, Maribyrnong, Hobsons Bay and Monash all require a permit or approval to put an A-frame on the footpath. Each sets its own size, placement, insurance and fee rules.
How big can my footpath A-frame be?
It varies. Yarra: 600 mm wide × 1000 mm high including legs. Stonnington: 1 m high × 750 mm wide. Maribyrnong, Merri-bek's guidelines and Monash's policy: 1 m high × 0.6 m wide. Hobsons Bay: 1 m high × 0.7 m wide. Wyndham's policy: 0.7 m wide × 1 m high. Port Phillip's 2024 guidelines: 1.2 m high × 0.7 m wide. City of Melbourne: 1 m wide × 1 m high. The Victorian model conditions suggest up to 1.2 m high and 0.9 m wide. Check whether your council measures the board or the whole frame: Yarra's limit includes the legs.
Will the Vivid Ads A-frame fit my council's limits?
Its boards are 600 mm wide × 900 mm high. The dimension drawing for the metal frame labels it 600 mm W, 900 mm H (measured along the sloping side) and 670 mm D. We don't yet publish the assembled vertical height or the width including the feet. Where a council caps the sign at 1 m high including legs or 600 mm wide, ask us to confirm the measured size before you apply or order.
Can I put a feather or teardrop flag on the footpath instead?
Sometimes. The Victorian model conditions allow one A-frame or one teardrop flag in your trading zone, not both. Port Phillip says it doesn't permit flags or banners such as teardrop banners, Yarra needs specific written approval, Wyndham's policy prohibits spinning flags and banners, and Hobsons Bay's current code allows one sign per premises. Ask your council about flags, and their height, before you buy one.
How much does a footpath sign permit cost?
Examples published by councils: City of Melbourne $255.50 application plus $776.70 licence for 2026–27 (ABLIS); Moonee Valley $180 from 1 July 2026; Merri-bek $143 per A-board plus a $67.70 inspection fee for new applications; Wyndham $340 for a new application plus $147 per sign. Compare the total for your situation (application, permit and inspection fees). Councils review fees periodically, and permit years and renewal dates differ (Merri-bek and Hobsons Bay permits run to 31 August).
What insurance do I need?
Most councils ask for a certificate of currency for your public liability insurance. The councils we checked ask for $20 million (City of Melbourne's street signage page, Yarra, Port Phillip, Stonnington, Hobsons Bay, Monash) or $10 million (Merri-bek, Wyndham's policy). Several also require the council to be noted as an interested party, and Wyndham's policy asks for a principal's indemnity extension.
When does the A-frame have to come in?
Bring it inside whenever the business is closed. The Victorian model conditions also say signs are removed if damaging weather is predicted or when the footpath is needed for a street event or works. Follow the display hours in your permit: Merri-bek, for example, sets 9 am–11 pm in commercial areas and 9 am–10 pm in residential areas or within 30 m of one, unless your planning permit says otherwise.
What if my footpath is narrow?
Yarra doesn't allow footpath trading where the footpath is under 2.5 m wide, Merri-bek's guidelines set 2.9 m, Monash only considers footpaths wider than 2.4 m, and the City of Melbourne requires the footpath beside your entrance to be at least 3.5 m wide. Port Phillip says narrow footpaths and laneways may not be able to accommodate an advertising board. Consider a window display or a sign on your building instead, subject to planning rules and your landlord's consent.
Is this the same as a planning permit?
No. A footpath trading permit and a planning permit are different approvals. Clause 52.05 of the planning scheme applies to signs generally, not only on private land, so ask the council whether your sign needs either or both. See business signage planning rules in Victoria.
Can I use a footpath permit for a pop-up, stall or event promotion?
A temporary footpath trading permit, a street activity permit or an event approval may apply, depending on the council. An ordinary shopfront A-frame approval may not cover a pop-up, stall or event promotion, and an organiser's permit may not cover an individual exhibitor's sign. Ask the council which approval covers your activity, location and dates.
Does my A-frame permit cover goods displays or a flag?
Not necessarily. Councils often list A-frames, flags and goods displays separately, and some allow only one sign item per premises. If you want to add or change items, ask whether you need to amend the permit.
What happens if I put an A-frame out without a permit?
It depends on the council. Port Phillip's A-board fact sheet says breaches can lead to a notice to comply, an infringement or the board being impounded, and Hobsons Bay says failing to get a permit is an offence under its local law. Councils can also ask you to remove signs for works, emergencies or events.
More: Do I need a permit for my sign? · A-frame signs for shops · Business signage planning rules in Victoria · Market stall signage.
Sources
| Fact | Source | Checked |
|---|---|---|
| Model footpath trading conditions for councils to adopt: one A-frame (max 1.2 m × 0.9 m) or one teardrop flag; trading zone clearances; removal at close of trade or damaging weather (November 2025) | Victorian Government: Guide to Footpath Trading Permits (PDF) | 20 Nov 2026 |
| City of Melbourne: permit, 1 m × 1 m, clearances, banned streets, $20 million insurance | City of Melbourne: Street signage | 20 Nov 2026 |
| City of Melbourne 2026–27 fees: $255.50 + $776.70 | ABLIS: Permit to place signs, City of Melbourne | 20 Nov 2026 |
| Yarra: 600 × 1000 mm incl. legs, 1 sign (may apply for 2 with two frontages), 2.5 m minimum footpath, zones and access gaps, $20 million insurance, fees per advertising frame | Yarra City Council: Footpath Trading Policy 2026 | 20 Nov 2026 |
| Port Phillip: one board, 1.2 m × 0.7 m, kerb zone, weighting (adopted 7 Aug 2024) | City of Port Phillip: Footpath Trading Guidelines 2024 | 20 Nov 2026 |
| Port Phillip: permit, no flags or teardrop banners, $20 million insurance, ten business days | City of Port Phillip: A-board permit | 20 Nov 2026 |
| Port Phillip older limit 1.0 m × 0.7 m (updated 20 Dec 2019) | City of Port Phillip: A-boards fact sheet | 20 Nov 2026 |
| Stonnington: 1 m × 750 mm, one per business, 300 mm from kerb; annual fee per board (page showed $385, invoices 1 July 2025–30 June 2026); $20 million insurance | City of Stonnington: Apply for a footpath trading permit | 20 Nov 2026 |
| Moonee Valley: zones 1.2 m / 1.8 m and 0.5 m; $180 advertising signs fee from 1 July 2026 | Moonee Valley City Council: Footpath trading permit | 20 Nov 2026 |
| Merri-bek: A-boards $143 each, $67.70 inspection fee, $10 million insurance, hours (including within 30 m of residential areas), valid to 31 Aug | Merri-bek City Council: Other permits for businesses | 20 Nov 2026 |
| Wyndham: permit for A-frame signs, sketch and insurance; $340 new application, $147 per sign, renews 31 Aug | Wyndham City: Get a permit to trade on the footpath | 20 Nov 2026 |
| Wyndham policy: 0.7 m × 1 m, 0.75 m from kerb, 1.8 m corridor, one per premises, no residential zones, $10 million insurance (document dated November 2015) | Wyndham City: Footpath Trading Policy and Guidelines | 20 Nov 2026 |
| Maribyrnong: application, diagram, public liability | Maribyrnong City Council: Commercial street furniture and footpath signage | 20 Nov 2026 |
| Maribyrnong: A-boards 1 m × 0.6 m, one per business, 1.5 m clear footpath, 600 mm from kerb, $10 million insurance (2026–27) | Maribyrnong City Council: Application for Commercial Street Furniture Permit 2026–2027 | 20 Nov 2026 |
| Hobsons Bay: permit required, offence under the Community Local Law | Hobsons Bay City Council: Footpath Trading | 20 Nov 2026 |
| Hobsons Bay: A-boards 1 m × 0.7 m, one per premises, trading zone only, $20 million insurance, permits to 31 Aug (version 003, approved 1 Jul 2025) | Hobsons Bay City Council: Footpath Furniture Trading Code of Practice | 20 Nov 2026 |
| Monash: $20 million public liability per single event; layout plan or photos | City of Monash: Business Application Guide | 20 Nov 2026 |
| Monash: portable signs 1.0 m × 600 mm, trading zone, footpath over 2.4 m, 1.8 m pedestrian zone, 0.6 m kerbside (adopted 30 Jul 2024) | City of Monash: Footpath Trading and Access Policy 2024 | 20 Nov 2026 |
| Merri-bek: one sign per premises unless on a corner, 1 m × 0.6 m, footpaths 2.9 m or wider | Merri-bek City Council: Footpath Trading Guidelines | 20 Nov 2026 |
| Monash: Signs and Goods Application for A-frames | City of Monash: Footpath Trading & Outdoor Advertising | 20 Nov 2026 |
| Finding your council's permits | ABLIS (Australian Government) | 20 Nov 2026 |
| A Frame Signs: metal frame with two 600 × 900 mm, 5 mm boards, A$125 | Vivid Ads: A Frame Signs | 20 Nov 2026 |
| Frame drawing: 600 mm W, 900 mm H (sloping side), 670 mm D | Vivid Ads: A-frame sign frame only | 20 Nov 2026 |
| Budget A-Frame Signs: 600 × 900 mm, A$75 | Vivid Ads: Budget A-Frame Signs | 20 Nov 2026 |
| Replacement A-frame board 600 × 900 mm, A$45 | Vivid Ads: Printed Signs ONLY (A-Frame) | 20 Nov 2026 |
| Feather Flags: small 2.5 m, single-sided, ground spike, A$99 | Vivid Ads: Feather Flags | 20 Nov 2026 |
Councils review fees and revise their policies, and permit years differ. Check your council's current rules and the conditions of any permit you hold, and tell us if a source above has changed so we can update this page.
What our customers say
“Have put the cafe borders in place customers happy to have the wind break. Councils happy to have border”
“…Fast production and great quality of an A frame.”
“…They look amazing and we are very happy with our new signage. Looks great on the sidewalk of the street!”
Short excerpts from reviews customers left about Vivid Ads on our store reviews, quoted word for word (including any typos). Read all our customer reviews.