Marquee & Market Stall Signage Guide

Home / Guides / Event & Festival Signage Guide / Marquee & Market Stall Signage
EVENT & FESTIVAL SIGNAGE GUIDE · MARQUEES & STALLS

How to make your marquee or market stall look professional

Facts confirmed by Zulfeqar Ahmed, CEO, Vivid Ads · Printing in Melbourne since 2007 · Updated 21 Nov 2026

Vivid Ads no longer sells marquees, but we print what makes one look professional. This guide shows what goes where, the banner and table throw sizes that fit 3 × 3, 3 × 4.5 and 3 × 6 m marquees, how to weight and secure it all outdoors, and a packing checklist.

✓ Product facts and prices checked on our live website 20 Nov 2026 (incl GST, before delivery). Council and safety points link to official sources at the end.

Two Monti Antonio calender heat presses with rolls of transfer paper at Vivid Ads in Derrimut
Our two Monti Antonio calenders, which use heat and pressure to move the printed dye into the fabric.

Quick answers

~2800 mm

a good starting width for a banner on a 3 m side, leaving room to tie it to the legs. Measure your frame first.

A$125

for a loose 6 ft printed table throw (incl GST): our suggested first purchase if you already have a table.

Ask

your organiser how much weight (ballast) each marquee leg needs. Council requirements differ; see the examples in section 5.

0

marquees sold by us. We print the banners, throws, flags and signs; get the marquee and weights from a marquee supplier.

Prices are from our website on 20 Nov 2026, incl GST, before delivery, with your own print-ready artwork.

1. What goes where

A professional-looking stall answers three questions from a few metres away: who are you, what do you sell, and how do I buy? Each item below does one of those jobs. Here is our suggested layout for a 3 × 3 m site.

What goes where in a 3 × 3 m marquee stall (seen from above) Plan view of a 3000 × 3000 mm marquee inside a slightly larger stall site, with the aisle along the front. 1: a fabric banner about 2800 mm wide tied to the back of the frame. 2: optional fabric banners on one or both sides. 3: a 6 ft trestle table, 1830 × 762 mm, with a printed table throw. 4: one or two flags beside the front corners, outside the roof but inside your site, where they can spin freely. 5: an A-frame inside your site at the entry side, not in the aisle. 6: a pull-up banner in a sheltered back corner. A weight sits on every leg, sized to your organiser's rules. AISLE (public walkway, keep clear) your site (ask the organiser for its size) marquee 3000 mm 3000mm 1 2 6 ft table + throw1830 × 762 mm3 4 5 6 ■ leg weight(organiser'srules)
Our suggested layout for a 3 × 3 m marquee, not a rule. Layout concept, not an installation drawing. 1 back banner · 2 side banners (optional; leave the openings your organiser requires, as some councils require two exits) · 3 table and throw · 4 flags beside the front corners, inside your site · 5 A-frame inside your site at the entry side · 6 pull-up in a sheltered back corner. If your site is only as big as the marquee, ask the organiser where flags may stand; some markets don't allow flags, A-frames or anything past your site line.
The job of each item
Item Where Its job
1. Back banner Tied across the back of the frame, high enough to read over people at the table Your name and what you do, seen from down the aisle
2. Side banners (optional) Inside one or both sides Seen by people walking towards you; they can screen neighbouring stalls. They add wind load and must leave your exits open (see section 5)
3. Table throw On your trestle table, set back slightly from the front edge of your site Hides boxes under the table and puts your logo on the front of the table
4. Flags Beside the front corners, outside the roof but inside your site, clear of the frame so they can spin Lets people find you across a busy field or car park
5. A-frame Inside your site at the entry side, never in the aisle Prices, today's offer, "cards accepted", or a menu
6. Pull-up banner (optional) Indoor events; outdoors only briefly, in a dry, genuinely wind-sheltered back corner Extra detail: products, services, a QR code
The same stall seen from the aisle Front view of a 3 m wide marquee. The back banner, about 2800 × 1000 mm, is tied to the back of the frame high up so it can be read over people standing at the table. The 6 ft table is 740 mm high with a printed throw reaching the ground on the front. A 2.5 m small feather flag stands beside one front corner, outside the roof, and an A-frame stands inside the other front corner. Labels say to measure the clear height under your roof frame before choosing a banner height. YOUR NAMEback banner ~2800 × 1000 mm table throwtable 740 mm high flag 2.5 m(beside themarquee) A-frame measure theclear heightunder theroof frame
Concept only, not to scale. Keep the bottom of anything hung across the front of the stall clear of people's heads; banners usually work best on the back and sides.

Design tips that work at stalls: put your name and one line about what you do on the back banner, in the biggest lettering that fits; keep the throw simple (logo plus one line); use the same colours on every piece so the stall reads as one brand. Our sale signage guide shows how big lettering needs to be for different reading distances, and the artwork guide covers files, bleed and resolution.

2. Suggested banner sizes for common marquees

Pop-up marquees are commonly sold in 3 × 3 m, 3 × 4.5 m and 3 × 6 m sizes (Australian maker Extreme Marquees, for example, lists all three among its folding gazebo sizes). Frames differ between brands, so measure the distance between the legs and the clear height under the roof frame before ordering. Our suggestion (sizing advice, not a manufacturer's fit or installation specification) is a banner about 200 mm narrower than the frame overall, allowing roughly 100 mm at each end for ties; measure between the points you'll actually tie to, including any middle legs. Ask the marquee supplier or hire company to approve the banner size, which frame members it may be tied to and the fixing method.

Starting sizes for Custom Fabric Banners with eyelets (live prices, 20 Nov 2026, incl GST)
Marquee Where Suggested banner (W × H) Price each
3 × 3 m Back (3 m) 2800 × 1000 mm (sign band) or 2800 × 1800 mm (taller banner) A$136.13 · A$162.36
3 × 3 m Side (3 m) 2800 × 1000 mm A$136.13
3 × 4.5 m Long side (4.5 m) 4300 × 1000 mm A$155.25
3 × 6 m Long side (6 m) 5800 × 1000 mm A$193.86
Any Small sign band 2800 × 500 mm A$136.13

For the single eyeleted banners quoted here, a minimum charge of A$136.13 applied, which is why 2800 × 500 mm and 2800 × 1000 mm cost the same; more identical banners cost less each. Custom sizes run from 300 × 300 mm up to 10,000 × 2,700 mm in the calculator; other finishes (rod pockets, Velcro hook edges, hemmed only) are priced there too. Whether the long side or the 3 m side faces the aisle depends on your site plan.

What our banners are made of: 250 gsm (grams per square metre) polyester, printed single-sided by dye-sublimation, which gives a matte finish and folds for transport. The back shows the reverse of the print, so think about what the neighbouring stall will see. Our fabric banners are made mainly for indoor and event use: they can be tied up outdoors for an event day, but we don't rate them for permanent outdoor display or quote a lifespan. Let them dry before packing. If your organiser asks for fire-performance certificates for fabrics, ask us before you order. More in the banner materials guide.

3. Table throws: which one fits your table

Table throws (live prices, 20 Nov 2026, incl GST)
Throw (size label) Fits a trestle table of Loose fit, closed back
4 ft 1220 × 615 mm, 740 mm high A$90
6 ft 1830 × 762 mm, 740 mm high A$125
8 ft 2440 × 762 mm, 740 mm high A$149

Table sizes from our product page, which says the throws suit standard trestle tables like those sold at Bunnings. A fitted 6 ft throw was A$149 in the calculator on the same day.

Printed Vivid Ads table throw on a trestle table at an event
  • Loose or fitted: a loose throw drapes like a tablecloth; a fitted throw is tailored to the table for a sharper look.
  • Closed or open back: an open back lets you reach stock stored under the table from behind; a closed back looks tidy from all sides.
  • Leave room to get in and out: a 6 ft table on a 3 m frontage leaves about 1.17 m in total beside it (about 585 mm each side if centred), before legs and weights. That is leftover frontage, not an access width: plan an unobstructed way in and out with your organiser. Keep a clear way in for staff and customers, including people using wheelchairs or prams; a 4.5 m or 6 m frontage gives more room for an 8 ft table or two tables.
  • Artwork: keep your logo on the flat front panel, away from the corners and folds.
  • Printed on our 250 gsm fabric; the product page describes the throws as washable and hard-wearing.

4. Flags: get found across the field

Flags can help people spot your stall from further away. Choose the shape for your artwork and the space you have, then the base for the surface you'll be standing on.

Our flag range (live prices, 20 Nov 2026, small size, single-sided, incl GST)
Flag Heights With free ground spike Good for
Feather 2.5 · 3.5 · 4.8 m A$99 Tall and narrow: height for long sightlines
Teardrop 2.1 · 3.0 · 4.2 m A$99 Pulled taut on a curved pole, so it holds its shape
Bow 2.5 m (small) A$99 A wider top for a logo
Which base (from our flag base guide)
Surface Base Small feather flag price
Grass or firm soil, where the organiser allows stakes Ground spike (included free, about 50 cm long) A$99
Concrete, bitumen, pavers, indoors Premium Cross Base with Water Bag (fill the bag on site) A$109.90
Hard ground, no water to fill or tip out Heavy Duty Concrete Base (10 kg) A$185

Before you use a spike: check the organiser or landowner allows stakes in the ground (some councils ban pegs for marquees) and that the spot is clear of underground services. Our hardware range lists the cross base at 4 kg and the water bag at 5 kg (filled). A base you choose replaces the free spike; order a second base separately if you stand on both grass and concrete. Single-sided flags show a mirror image on the back; double-sided (two prints with a block-out layer) was A$119 for a small feather flag with spike. All our bases have a ball-bearing spindle so the flag can swivel 360°: keep flags clear of the marquee frame, guy ropes and the next stall so they can turn without rubbing. Details in which flag base do I need?

5. Weights, wind and safety outdoors

We don't publish wind ratings for flags, banners or A-frames, and we don't sell marquees or marquee weights. Meet all the conditions that apply: your council's, your event organiser's and the marquee maker's instructions. If they conflict, sort it out before set-up day. The points below come from official council sources and our own product pages.

Marquee weights: requirements differ, so ask first

Examples of council requirements (checked 20 Nov 2026)
Source What it says
Whitehorse City Council (VIC), event planning fact sheets: marquees and umbrellas If the marquee has no wind speed rating: at least 40 kg per leg for marquees or gazebos with walls, 20 kg per leg without walls. Use sandbags, steel leg weights, concrete weights or water ballast; no makeshift weights such as plastic bags or buckets filled with sand, and no tent pegs or stakes. Marquees need two accessible exits. In high winds, remove walls.
Colac Otway Shire (VIC), marquees and smaller structures A minimum of 10 kg per leg, or pegging; on hard surfaces such as bitumen, concrete and pavers, weights only; attach weights as low to the ground as possible. All structures, whatever their size, need to be safely secured.
City of Boroondara (VIC), outdoor event guide Anchor to the manufacturer's recommended minimum weights per leg and add more if in doubt; marquees can't be pegged into the ground; only use marquees within the manufacturer's wind limits. It recommends a professional supplier for multiple marquees or any marquee larger than 3 × 3 m.
City of Moreton Bay (QLD), fact sheet for its own 6 × 3 m hire marquee For that marquee only: dismantle when winds over 15 knots are expected, or when the Bureau of Meteorology issues a storm or severe weather warning.

These are examples, not a national standard, and other councils set different requirements. They can even conflict: Whitehorse says to remove walls in high winds, while Colac Otway's document says marquees are to be closed on all four sides. Get an agreed weather and pack-down procedure for your structure before the event; don't improvise.

Banners add wind load: check whether wall rules apply

A solid fabric banner tied across the back or side of a marquee catches wind, much as a wall does. Whitehorse, for example, sets a higher minimum for marquees with walls than without, and asks for walls to come off in high wind. So:

  • Ask your organiser, and the marquee supplier if it's hired, whether banners can be attached and whether the walled-marquee weight rules apply. If the setup hasn't been approved, leave the banners off.
  • Secure every eyelet at the approved fixing points; a banner held at only a few points flaps and tears at its fixings.
  • Agree with the organiser beforehand when signs come down and when the marquee is packed away. Take banners and flags down before conditions become unsafe, following the supplier's instructions; don't attempt it if it is already unsafe.
  • Keep the openings your organiser requires: Whitehorse, for example, requires two accessible exits from a marquee. A back banner plus two side banners can leave only the front open, so don't use that layout where two exits are needed unless an approved opening remains.
  • Don't tie banners or flags to temporary fencing unless whoever is responsible for the fence says it's suitable. South Australia's Department for Infrastructure and Transport (in guidance for construction-site fencing) warns that banners and signs add wind load to temporary fences.

Flags, A-frames and pull-ups

  • Flags: on hard ground, fill the base's bag completely with water or sand (both work well), or use the Heavy Duty Metal Plate (5kg), which is very stable in normal wind. In our experience a properly weighted flag doesn't blow away, but take flags inside in very high winds or storms. Never tie a flag pole to the marquee frame: it can't swivel, and it adds load to the marquee.
  • A-frames: our Budget A-Frame product page suggests adding weight such as a sandbag; the A-frame guide covers wind and placement.
  • Pull-up banners: indoor and sheltered use only. Outdoors, keep them at the back of the marquee and take them in if the wind picks up.
  • Keep the aisle and exits clear: flags, bases and A-frames go inside your own site; nothing should narrow the walkway or hide emergency exit signs.

6. Check your organiser's rules before you order

  • Site size and layout: some events book sites in fixed sizes (Monash's event site guidelines treat a stallholder site as 3.5 × 3.5 m unless stated otherwise). Ask whether your marquee, flags and A-frame must all fit inside it.
  • What's allowed: some organisers ask stallholders to describe or show their signage when they apply, or limit flags and A-frames. Ask before you print.
  • Bring-your-own marquees: Boroondara, for example, describes BYO marquees as typically 3 × 3 m or smaller and recommends a professional supplier for anything larger.
  • Bigger structures: in Victoria, tents, marquees and booths with a floor area over 100 m² used for public entertainment are "prescribed temporary structures" that can need a Building and Plumbing Commission occupancy permit (retail and other uses are treated differently); a 3 × 6 m marquee is 18 m², but being under 100 m² doesn't remove other requirements. Confirm with the organiser and supplier who obtains any approvals. Other states have their own rules.

Questions to ask your organiser before you order

  • How big is my site, and can flags, A-frames or bases sit outside the marquee?
  • May I attach banners to the marquee, and do the walled-marquee weight rules then apply?
  • How much weight per leg, and are pegs or stakes allowed?
  • Which exits or openings must stay clear?
  • What public liability insurance and paperwork do I need?
  • Do fabrics need fire-performance certificates?
  • Who decides when to stop trading in bad weather?
  • Is power or lighting allowed for evening trading?

Planning the whole event rather than one stall? See event signage by size.

7. Three example signage shopping lists

Starter stall

A$224
  • Loose 6 ft table throw: A$125
  • Small teardrop flag, ground spike: A$99

For school fetes and a first market. Add a 450 × 450 mm Budget A-Frame (A$55) for prices.

Signage kit for a 3 × 3 m marquee

A$446.03
  • Back banner 2800 × 1000 mm, eyelets: A$136.13
  • Loose 6 ft table throw: A$125
  • Small feather flag, cross base and water bag: A$109.90
  • Budget A-Frame 600 × 900 mm: A$75

For regular markets on hard ground. Choose the ground spike (A$99) instead if you always stand on grass. Marquee, weights and table not included.

Expanded signage kit for a 3 × 6 m marquee

A$1,048.92
  • Back banner 5800 × 1000 mm, eyelets: A$193.86
  • Two side banners 2800 × 1000 mm: A$272.26
  • Loose 8 ft table throw: A$149
  • Two small feather flags, cross base and water bag: A$219.80
  • Metal A-frame with two printed boards: A$125
  • Optional pull-up banner 800 × 2000 mm (indoor or genuinely sheltered spot): A$89

For festivals and expos where you trade all day. Marquee, weights and tables not included; check the walled-marquee rules and exits first.

Totals are simple sums of single-item prices from our website on 20 Nov 2026, incl GST, before delivery and design, with your own print-ready artwork. Different designs go on separate lines. Not included: the marquee, its weights, tables, cable ties and bungee cords.

8. Packing checklist

Print this list, or screenshot it, the night before.

  • Marquee, roof, and the weights your organiser requires for every leg
  • Back and side banners, folded dry
  • Cable ties (plenty of spares) and side cutters to remove them
  • Bungee cords or rope for quick fixing
  • Trestle table(s) and the matching table throw
  • Flags: poles, flag prints, carry bag
  • Flag bases: ground spike for grass; cross base and water bag (plus water or sand) for hard ground
  • A-frame and its printed boards; a sandbag or weight if it's a Budget A-Frame
  • Pull-up banner (only if you'll have a sheltered spot)
  • Price signs, "cards accepted" sign, QR code sign
  • Gaffer tape and a small tool kit
  • Rubbish bag, and a towel for drying banners before packing
  • Your site number, organiser contact and set-up time
  • Weather check the morning of the event

Before you open: a quick check

  • Set up once at home or the night before with stock in place: can the banner and throw still be seen?
  • Does your table match the throw size?
  • Can flags spin without crossing your site boundary or touching the frame?
  • Are weights, cables and stock secured and clear of walkways and exits?
  • Who keeps an eye on the weather during trading?

Price and food signs: show the total price you'll charge, including GST and any unavoidable fees (the ACCC explains price displays). Food stalls must also have allergen information displayed with the food or available on request (see Food Standards Australia New Zealand).

After the event, let fabric banners, flags and throws dry fully before storing them, and check flag poles and bases for damage before the next one. Eligible hardware has a 12-month hardware warranty; printed graphics, carry cases, normal wear and weather damage are excluded (see our terms), and your Australian Consumer Law rights still apply.

9. When to order

  1. Upload your artwork (or choose a paid design option on the product page; Design it with AI is A$9.95 per finalised design).
  2. Approve your free digital proof. Every printed order gets one. Production starts once every proof on the order is approved and payment has cleared (or approved account terms are in place).
  3. Production: most products are made within 1 working day for 1–15 items approved by 3 pm Melbourne time on a working day (Monday to Friday, not Victorian public holidays; approvals after 3 pm count from the next working day). If you ask for a proof change, the clock starts from approval of the corrected proof. 16–40 items take 2 working days, 41–100 take 3 and 101–200 take 4. Above 200, our production team confirms the date after approval. Check the product page for your item.
  4. Delivery or pickup: we deliver Australia-wide with StarTrack or another carrier, depending on destination and size; freight is calculated at checkout for your postcode, and transit time depends on where you are. Or collect free from Gate 2, 90 Australis Drive, Derrimut VIC, 9 am–5 pm on working days once we email that your order is ready. We don't offer paid express freight or same-day production; you can arrange your own courier to collect.

Count back from your set-up day: delivery time to your postcode, then production, then time for you to check and approve the proof. Our suggestion is to order at least two weeks before a market or festival so a proof change or courier delay doesn't put you at risk; for a weekend event in Melbourne's west, free pickup from Derrimut can save the delivery days. Public holidays aren't working days; for Christmas and New Year deadlines and closure dates, check the Help Centre as the period approaches or contact us.

10. When not to buy (and what to do instead)

  • You need the marquee itself. We don't sell marquees, gazebos, canopies or marquee weights. Buy or hire from a marquee supplier, then dress it with our banners, throws and flags.
  • Your organiser bans flags or A-frames. Put the budget into the back banner and table throw instead.
  • The site is very exposed and windy. Skip tall flags, pull-up banners and frame-mounted banners unless your organiser and marquee supplier approve them; consider branding on the table instead, subject to your event's conditions.
  • You want to reprint an old pull-up banner. We don't replace pull-up prints; a new standard pull-up starts at A$79. See the pull-up guide.
  • It would arrive too late. Reuse what you have this time and order for the next event.

Questions stallholders ask

Do you sell marquees or gazebos?

No. Vivid Ads no longer sells marquees, gazebos, canopies or marquee weights. We print what goes in and around one: fabric banners, table throws, flags, A-frames, pull-up banners and corflute signs. Buy or hire the marquee and its weights from a marquee supplier, and secure it to your council's and organiser's conditions and the maker's instructions.

What size banner fits a 3 × 3 m marquee?

Measure your own frame first, because frames vary. As a starting suggestion, a fabric banner about 2800 mm wide fits inside a 3 m side and leaves room to tie it to the legs; 1000 mm high works as a sign above the table, or about 1800 mm for a taller banner. On our website on 20 Nov 2026 a 2800 × 1000 mm fabric banner with eyelets was A$136.13 incl GST, and 2800 × 1800 mm was A$162.36.

How do I attach a banner to a marquee frame?

First get the organiser's approval, and the marquee supplier's approval of the banner size, fixing points and fixing method. Our fabric banners can be ordered with hemmed edges and stainless steel eyelets (standard spacing every 1000 mm, closer every 500 mm, or corners only). Secure each eyelet at the approved points with cable ties or bungee cords. Other finishes are rod pockets and Velcro hook edges.

Which table throw fits a standard trestle table?

Our table throws come in 4, 6 and 8 ft to suit standard trestle tables: 1220 × 615 mm, 1830 × 762 mm and 2440 × 762 mm tables, 740 mm high. On 20 Nov 2026 loose throws were A$90 (4 ft), A$125 (6 ft) and A$149 (8 ft) incl GST. Choose loose or fitted, and an open or closed back.

How much weight does each marquee leg need?

There is no single national number. Meet your council's and organiser's conditions and the marquee maker's instructions. Requirements we found vary: Whitehorse City Council asks for at least 20 kg per leg without walls and 40 kg per leg with walls when there is no wind rating; Colac Otway asks for at least 10 kg per leg (or pegs where allowed); Boroondara points to the manufacturer's minimum and doesn't allow pegging. We don't sell marquee weights.

Do banners on a marquee make it less stable in wind?

They add wind load. A solid banner tied across the back or side catches wind much as a wall does, and some councils set higher weights for marquees with walls and ask for walls to be removed in high wind. Ask your organiser whether banners are allowed and which weight rules apply, and agree beforehand when signs come down and the marquee is packed away.

Can I use a pull-up banner outdoors?

They're made primarily for indoor use, and outdoor use isn't generally recommended. If you use one at an outdoor event, keep it short-term, dry and in a genuinely wind-sheltered back corner of your marquee, and take it in if the wind or rain picks up; a gust can blow one over.

Which flag base should I use at an outdoor event?

Use the free ground spike on grass or firm soil where the organiser allows stakes and the spot is clear of underground services. On concrete, bitumen or pavers use the Premium Cross Base with Water Bag (fill the bag with water or sand; both work well), the Heavy Duty Metal Plate (5kg) or the Heavy Duty Concrete Base (10kg). A properly weighted flag is very stable in normal wind; we don't publish a wind rating, and you should take flags inside in very high winds.

How far ahead should I order for a market or festival?

Production starts after artwork upload, proof approval and cleared payment. Most products take 1 working day for 1–15 items approved by 3 pm Melbourne time, longer for bigger quantities, then delivery time to your postcode. Our suggestion: order at least two weeks before the event so there's time for proof changes and delivery, or collect free from Derrimut.

What should I buy first to make a stall look professional?

Our suggestion, if you already have a table, is a printed table throw: on 20 Nov 2026 a loose 6 ft throw was A$125. Add a small teardrop or feather flag (A$99 with ground spike) so people can find you, then a back banner when your budget allows.

Ordering, proofs, delivery and GST: see our Help Centre.

Sources

Fact Source Checked
Table throws: 4 / 6 / 8 ft for trestle tables 1220 × 615, 1830 × 762, 2440 × 762 mm, 740 mm high; loose or fitted; 250 gsm fabric; washable; prices Vivid Ads: Table Covers And Throws (live price) 20 Nov 2026
Fabric banners: 250 gsm dye-sublimated polyester; finishes and eyelet spacing; sizes 300 × 300 to 10,000 × 2,700 mm; prices with eyelets Vivid Ads: Custom Fabric Banners (live calculator) 20 Nov 2026
Fabric banners mainly for indoor and event use; single-sided; no lifespan quoted Vivid Ads: Banner materials guide 20 Nov 2026
Feather flags 2.5 / 3.5 / 4.8 m; A$99 spike, A$109.90 cross base, A$185 concrete base (small, single-sided); A$119 double-sided; spindle; mirror image on back Vivid Ads: Feather Flags (live price) 20 Nov 2026
Teardrop flags 2.1 / 3.0 / 4.2 m; A$99 small with spike Vivid Ads: Teardrop Flags (live price) 20 Nov 2026
Bow flag small 2.5 m; A$99 with spike Vivid Ads: Bow Flags (live price) 20 Nov 2026
Which base for which surface; 50 cm spike; base weights (cross base 4 kg, water bag 5 kg); no wind rating; base replaces spike Vivid Ads: Which flag base do I need? 20 Nov 2026
Base bag can be filled with water or sand; metal plate stable in normal wind; properly weighted flags; take flags inside in very high winds Vivid Ads production team (owner decision) 21 Nov 2026
Metal A-frame with two printed 600 × 900 mm boards A$125 Vivid Ads: A Frame Signs (live price) 20 Nov 2026
Budget A-Frame A$55 / A$75; suggests adding weight Vivid Ads: Budget A-Frame Signs (live price) 20 Nov 2026
Pull-up banners 600 × 1400 mm A$79, 800 × 2000 mm A$89 Vivid Ads: Pull Up Banners (live price) 20 Nov 2026
Corflute 600 × 450 mm, ten signs A$136.10 Vivid Ads: Corflute Signs (live calculator) 20 Nov 2026
Production by quantity after proof approval by 3 pm Melbourne time; delivery and pickup Vivid Ads: product turnaround and Help Centre 20 Nov 2026
Hardware warranty and exclusions Vivid Ads: Terms of service 20 Nov 2026
Total price display including GST and unavoidable fees ACCC: Price displays 20 Nov 2026
Allergen declarations for unlabelled food: displayed with the food or provided on request Food Standards Australia New Zealand: Allergen labelling 20 Nov 2026
Folding marquee sizes include 3 × 3, 3 × 4.5 and 3 × 6 m Extreme Marquees: X5 True Blue gazebo sizes 20 Nov 2026
40 kg per leg with walls / 20 kg without (no wind rating); approved weight types; no pegs; no makeshift weights; two accessible exits; remove walls in high winds Whitehorse City Council: Event Planning Fact Sheets 2025, marquees and umbrellas 20 Nov 2026
Minimum 10 kg per leg or pegging; weights on hard surfaces; weights low to the ground; marquees closed on all four sides in high winds Colac Otway Shire: Marquees and smaller structures 20 Nov 2026
Manufacturer's minimum weights per leg; no pegging; wind rating; BYO marquees typically 3 × 3 m or smaller; professional supplier recommended for larger ones City of Boroondara: Outdoor event guide, marquees 20 Nov 2026
Dismantle hire marquee when winds over 15 knots are expected or a BoM severe weather warning is issued City of Moreton Bay: Marquee assembly instructions fact sheet 20 Nov 2026
Stallholder site 3.5 × 3.5 m unless stated otherwise City of Monash: Event site guidelines 2024 20 Nov 2026
Tents, marquees and booths over 100 m² used for public entertainment are prescribed temporary structures (Victoria) Building and Plumbing Commission Victoria (formerly VBA): Prescribed temporary structures 20 Nov 2026
Banners and signs add wind load to temporary fencing (construction-site guidance, applied here by analogy) SA Department for Infrastructure and Transport: Temporary Fencing safety share (April 2025) 20 Nov 2026

Prices, organiser rules and council requirements change. Check the product page calculator and your organiser’s current conditions before you order.

What our customers say

“…It looked so professional, fitted perfectly, and really helped my stall stand out.”
— Susan C., 14 Jul 2026 · Verified buyer
“…used it at our market yesterday - everyone said we stood out from afar!”
— JIll L., 18 Sep 2023 · Verified buyer
“Great quality printing and the stand was very sturdy! I used it at my most recent event and received lots of positive comments about it!”
— Julie N., 20 Apr 2026 · Verified buyer

Short excerpts from reviews customers left about Vivid Ads on our store reviews, quoted word for word (including any typos). Read all our customer reviews.

Published and funded by Vivid Ads, an Australian signage manufacturer in Derrimut, Victoria. We print in Derrimut on our own print fleet, including HP and Canon printers. Editor: Zulfeqar Ahmed, CEO. Prices come from our live website on the date shown and can change; product facts come from our product pages and calculators. Council, permit and safety points are general information from the official sources listed, not legal or engineering advice; confirm requirements with your council, venue or land manager, event organiser and equipment supplier, and get every approval that applies. How we check · Found a mistake? Email sales@vividads.com.au. Change log: 20 Nov 2026: first published after an AI-assisted fact-check; same day: clarified wind, exits, access and permit wording after a post-publication check. 21 Nov 2026: production times for aluminium signs and barriers aligned with our turnaround tool (1 working day for 1–15). 21 Nov 2026 (later): flag base and weight wording updated after an owner decision. 21 Nov 2026: reviewer byline, photo of our Derrimut factory and customer review excerpts added; reviewer added to the page data.