Signage Rules in Other States

Home / Guides / Signage Permits & Rules / Other states
SIGNAGE PERMITS & RULES · OTHER STATES

Signage rules in NSW, Queensland, WA, SA, Tasmania, the ACT and NT: where to check

Facts confirmed by Zulfeqar Ahmed, CEO, Vivid Ads · Printing in Melbourne since 2007 · Updated 21 Nov 2026

Each state and territory controls signs differently, and councils add their own rules. For each one: who decides, a sourced example, and the official place to check before you print.

✓ Key rules link to official planning scheme, council or government sources, read on 20 Nov 2026 (each source's own date is shown where it has one). General information, not legal advice. Rules change, so check with your council before you place a sign.

This page shows where to check, not the full rules. We've summarised one or two official sources per state or territory, checked 20 Nov 2026. Rules vary between councils and change, and some sources are older than others. Confirm with your council or the state agency before you place a sign. Not legal advice. Victoria has its own pages: planning rules and footpath permits.

Quick answers

Overlap

planning, building, public land, road authority and owner approvals can all apply; more than one is common.

20% / 6 m²

NSW exempt window business signs: whichever is smaller, inside the glass, not illuminated (NSW fact sheet, January 2022).

1 m high

Brisbane self-assessable footpath sign: up to 1 m high × 0.6 m wide × 0.6 m deep, up to two per shop, with placement conditions.

Main roads

can need the state road authority's approval too, for example Main Roads WA.

At a glance: who decides, and where to check

State or territory Signs on your property Footpath and public land Start here
New South Wales Exempt development if every standard is met; complying development (council or private certifier); otherwise a development application Council (approvals and bans vary); Roads Act approval for anything over a public road NSW signage fact sheet
Queensland Council planning schemes and/or advertising device local laws; building approval may also apply Council ABLIS: Queensland advertising devices
Western Australia Local planning scheme and policies; the WA Planning Commission for land reserved under a region scheme (limited exemptions for specified small signs; see conditions) Local government; Main Roads WA near main roads ABLIS: Main Roads WA approval
South Australia Check whether development approval is needed under the Planning and Design Code Council by-laws PlanSA: Find out if you need approval
Tasmania The planning scheme for your council area, applied by council Council by-laws Your council's planning page, e.g. City of Hobart: Signs
ACT ACT planning system Public unleased land: Movable Signs Code of Practice 2023; Designated Areas also need National Capital Authority approval ACT: Movable signs
Northern Territory Council codes and NT planning rules Council permits Your council, e.g. City of Darwin: Advertising sign permits

New South Wales State codes + council

Many business signs can go up as exempt development (no planning or building approval) if they meet the standards in the state's Codes SEPP. The NSW Government fact sheet Advertising and signage: rules for exempt and complying development (January 2022) summarises them. General conditions include written consent from the landowner (and the adjoining owner if the sign is over their land), approval under section 138 of the Roads Act 1993 if any part of the sign projects over a public road (including a footpath), securely fixing the sign to the relevant Australian Standards, and not obstructing traffic signs. If a sign doesn't meet the exempt standards, it may be complying development (a certificate from a council or private certifier) or need a development application. Some examples from the fact sheet:

Sign Exempt standards (summary)
Window signs Business signs inside the window of an existing building; up to 20% of the window surface or 6 m², whichever is smaller; not illuminated; one per premises for a home business.
Under-awning signs One per ground-floor tenancy; up to 1.5 m² and 2.5 m long; 2.6 m clearance above ground; at a right angle to the building; not beyond the awning fascia.
Top hamper signs (above a shop window or door) Up to 2.5 m² and 600 mm high; 2.1 m clearance; one per ground-floor tenancy; not on a heritage item or draft heritage item; other placement and lighting conditions apply.
Number of business identification signs No more than 3 signs on a building with one commercial tenant and 6 in total on any building.
Temporary event signs One banner and one other temporary sign per road frontage; up to 6 m²; within the property boundary (or projecting no more than 100 mm from a wall or fence); no higher than 5 m. Conditions on illumination and timing apply: the fact sheet gives not illuminated, not displayed earlier than 14 days before the event, and removed 2 days after, and commercial or retail event signs can't use this in a residential zone. Check the Codes SEPP for exactly how these apply to each temporary event sign.
Internal signs Inside a building, such as a stadium or shopping centre, that can't be seen from outside the site or building.

Signs that don't meet the standards may need complying development or a development application, and heritage items and conservation areas have extra limits. The fact sheet says it is "for guidance only" and refers to the State Environmental Planning Policy (Exempt and Complying Development Codes) 2008, so check the current policy and your council. Footpath A-frames are a council matter: the City of Sydney's Display of Goods on the Footway policy says sandwich boards and advertising A-frames are not permitted, while other councils approve them; see our A-frame guide.

Queensland Council local laws

Queensland councils regulate signs ("advertising devices") through their own local laws and/or planning schemes, and building approval can also apply, so the rules depend on the council. ABLIS's Queensland advertising device overview directs you to your local council. Brisbane City Council, for example, regulates them under its Advertising Devices Local Law 2021 (Advertising devices; Permitted Advertising Devices Designation):

  • Self-assessable devices "can be displayed without applying for Council approval" if they comply with the council's Permitted Advertising Devices Designation (and its Technical Standards if illuminated or electronic).
  • Window signs are self-assessable if they cover no more than 25% of the glass and are no larger than 2 m².
  • Footway (footpath) signs (A-frames, T-frames, sandwich boards): the Designation permits them in the business centre and industry environments (the council's summary page describes "a business or city area"). It allows "No more than two footway signs with a maximum height of 1 m, maximum width of 0.6 m and maximum depth of 0.6 m" per shop, on the kerb side at least 450 mm from the kerb, leaving a 2 m clear pedestrian corridor from the property boundary, no more than 4 m from the property's boundary, only during trading hours, with no moving parts and no merchandise. Size alone doesn't make a sign self-assessable; every condition must be met, so confirm your environment with the council.
  • The page lists bunting and streamers, fly posters, inflatable signs and standing vehicle signs as prohibited devices, which can't be approved (the Designation separately covers some community event signs), and signs on heritage places need approval. Other signs that don't comply need a full assessment and licence.
  • Small businesses in the Queen Street or Valley Malls, or with a heritage or commercial character overlay, may not be able to rely on self-assessable signs.

Western Australia Local planning + Main Roads

In WA, signs ("advertisements") on private land are generally controlled by each local government's planning scheme and local planning policies, so start with your council's planning or signage page. Two state-level layers can also apply:

  • Main roads: ABLIS lists an approval from Main Roads Western Australia to erect or exhibit a commercial advertising structure, including a sign, on or near a highway or main road, under the Main Roads Act 1930 and the Main Roads (Control of Advertisements) Regulations 1996. It says some minor signs are excluded, and that you also need any council approvals.
  • Reserved land: the WA Planning Commission's Operational Policy 5.4: Advertising on reserved land (31 March 2025) says an advertisement on land reserved by a region planning scheme requires the Commission's approval, but mobile signs removed daily (such as a "specials" sign) and business signage describing the name or the business carried out on the site don't need it where they're limited to one per business, no more than 1 m², and associated directly with the business at that location (or within 5 m). Other approvals may still apply.

Footpath A-frames in Perth vary by council: our A-frame guide compares the City of Perth and the City of Vincent.

South Australia PlanSA + council

South Australia has one state planning system, with the Planning and Design Code. The City of Unley's Do I need development approval? page says development approval is needed "in most cases" and lists erecting a sign among its examples; it also says taking over an established business may need approval for "A change in external advertising signs". Start with PlanSA's Find out if you need approval page, then confirm the approval pathway with your council.

For footpath A-frames, the City of Adelaide's objects on footpath rules allow signs that comply with its moveable signs by-law without a permit; see the details and limits in our A-frame guide. Other SA councils have their own by-laws.

Tasmania Planning scheme + council

Councils assess signs under the planning scheme that applies to the site, which for most councils is the Tasmanian Planning Scheme. The City of Hobart's Signs page says whether you need approval depends on "the type of sign", "the size of the sign", "the zoning of your property" and whether the property is heritage-listed or in a heritage precinct; fees may apply and some applications are publicly advertised. Owners of a sign put up without a needed approval may be asked to apply for a permit, modify it or remove it.

Hobart's Public Spaces By-law allows a compliant footpath sign without a permit in most places; the clearances and banned areas are summarised in our A-frame guide. Check which planning scheme applies in your council area and ask the council.

Australian Capital Territory Territory code

On public unleased land, the ACT Government's Movable signs page says signs "must be placed in accordance with the Code of Practice for Movable Signs", the Public Unleased Land (Movable Signs) Code of Practice 2023 (No 1). Key points for business signs:

  • Business signs "must be an A-frame construction", with maximum enveloping dimensions of 900 mm × 1200 mm including the framework
  • A maximum of two movable signs per business, only while it is open for trading, kept within the commercial or industrial area where the business is
  • At least 1.2 m back from the kerb; in commercial areas, a clear walkway at least 2.5 m wide as well
  • Not within 20 m of traffic lights or of the apex of the kerb lines at an intersection, not at roundabouts or median strips, and not in the light rail corridor
  • Stable in wind; not attached to poles, trees or other government property; not obstructing paths, hydrants or services
  • Public liability cover of at least $10,000,000, and the sign identifies its owner
  • In Designated Areas (such as the Parliamentary Zone), movable signs need the approval of the National Capital Authority; confirm any other requirements too

Northern Territory Council permits

The City of Darwin's Advertising sign permits page says businesses must get a sign permit before erecting signs in the road reserve or other public places, and signs on private land need a permit if they don't meet its Outdoor Advertising Signs Code (Policy 042). For moveable (A-frame) signs:

  • "All moveable signs on public land require a council permit, this permit is to be renewed annually."
  • On public land, only in business and industrial zones, and only during business hours
  • Business zones: up to 1.2 m high, 0.8 m wide and 1 m²; industrial zones: up to 1.8 m high and 1.2 m wide
  • A clear pedestrian path at least 2 m wide beside the sign
  • Removed outside business hours and during high winds or cyclones

Other NT councils set their own rules, and signs on roads managed by the Northern Territory Government may need its approval: ask the council which applies.

How to find your council's rules in any state

  1. Search ABLIS, the Australian Government's business licence service, for your council plus "sign", "advertising device" or "footpath" (in the ACT, the ACT Government).
  2. Check your council website for "signage", "advertising", "footpath trading", "A-frame" or "outdoor dining".
  3. Get your property's zone and overlays from the state planning portal, because heritage and character areas often have stricter sign rules.
  4. Ask about main roads if your sign faces a highway or arterial road: a state road authority may also need to approve it.
  5. Ask your landlord or centre manager if you lease, as leases and shopping centres often have their own approval process.
  6. Get the answer in writing if anything is unclear, before you order and install.

Before you order: questions to ask

  • What type of sign is it: business identification, temporary promotion, event or third-party advertising?
  • Does it need planning, building, public land, road authority or owner approval, or several of these?
  • How does the council measure size: printed area, or the whole sign including frame, feet and weights?
  • What are the fee, lead time, expiry and renewal date?
  • What insurance certificate, owner consent and site plan do they need?
  • If it's for an event, does the organiser's permit cover it?
VIVID ADS DISPLAY OPTIONS

Signs we print and deliver Australia-wide

Vivid Ads prices include GST for one item in the configuration shown, checked on our website 20 Nov 2026; you supply print-ready artwork. Every printed order includes a free digital proof; design is a paid option. For most products, 1–15 items are made within 24 hours (1 working day) once the proof is approved and payment has cleared by 3 pm Melbourne time on a working day; larger quantities and some products take longer (see the product page), and delivery time is extra. Delivery is calculated at checkout, or collect free from Gate 2, 90 Australis Drive, Derrimut VIC, 9 am–5 pm on working days. Hardware such as A-frame frames and flag poles carries a 12-month hardware warranty, as shown on the product page, in addition to your Australian Consumer Law rights. We print your sign; you are responsible for any permit and for where and how it is placed. Our A-frame boards are 600 mm wide; the metal frame drawing labels it 670 mm deep when open, so as drawn it is deeper than Brisbane's 0.6 m self-assessable limit and Adelaide's 600 mm base limit: in those cities ask the council, or ask us about a smaller sign. Photos are Vivid Ads product images.

Questions about sign rules outside Victoria

Is there one national law for business signs in Australia?

No. Signs are controlled by each state or territory's planning system and by local councils, and footpath signs are usually controlled by council local laws or (in the ACT) a territory code. Main roads can add a state road authority approval.

Can I put an A-frame on the footpath in Sydney?

It depends on the council. The City of Sydney's Display of Goods on the Footway policy says sandwich boards and advertising A-frames are not permitted, while other Sydney councils approve them with conditions. See the council examples in our A-frame guide.

How much of my shop window can I cover in NSW?

The NSW Government fact sheet (January 2022) summarises the exempt development standard for window signs, which are business signs on the inside of a window of an existing building: up to 20% of the window surface or 6 m², whichever is smaller, and not illuminated (a home business gets one sign). That is a pathway to avoid needing approval, not a general allowance for any advertising; larger or illuminated signs may need approval, and heritage listings can add limits.

Do footway signs need approval in Brisbane?

Brisbane's Permitted Advertising Devices Designation lets footway (footpath) signs such as A-frames go out without an application in the business centre and industry environments, if every condition is met. It allows up to two per shop, no more than 1 m high, 0.6 m wide and 0.6 m deep, on the kerb side at least 450 mm from the kerb, with a clear 2 m pedestrian corridor between the property boundary and the sign, no more than 4 m from the property's boundary, only during trading hours, with no moving parts and no merchandise. Check which environment your property is in with the council. Signs that don't comply need assessment, and prohibited devices can't be approved.

What are the A-frame rules in Canberra?

On public unleased land, the Public Unleased Land (Movable Signs) Code of Practice 2023 applies: business signs must be A-frames, no larger than 900 × 1200 mm including the frame; a maximum of two per business, only while it's open and within the commercial or industrial area where the business is; at least 1.2 m back from the kerb, with a 2.5 m clear walkway in commercial areas; not within 20 m of traffic lights or of the apex of the kerb lines at an intersection, or in the light rail corridor; and public liability cover of at least $10 million. In Designated Areas, movable signs need the approval of the National Capital Authority.

Do I need a permit for an A-frame in Darwin?

Yes on public land. The City of Darwin says all moveable signs on public land need a council permit renewed annually; on public land they're allowed only in business and industrial zones, during business hours, with size limits and a 2 m clear pedestrian path.

How do I find my council's sign rules?

Search ABLIS (the Australian Government's business licence service) for your council and 'sign' or 'advertising device', or look on your council's website for 'signage', 'advertising', 'footpath trading' or 'A-frame'. In the ACT, start with the ACT Government. If the rules aren't clear, call the council before you print.

What about signs at a trade show or market interstate?

Inside an exhibition venue, the venue and organiser set extra requirements on top of any public rules: stand design approval, hanging signs, materials and exits. Check the event's exhibitor manual first. At an outdoor market or event, ask the organiser, who may hold the council permit. See our first-time exhibitor guide.

More: Do I need a permit for my sign? · A-frame signs for shops · Real estate sign rules (incl. NSW).

Sources

Fact Source Checked
NSW exempt signage standards: window, under-awning, top hamper, number of signs, temporary event signs, Roads Act approval (January 2022) NSW Government: Advertising and signage, rules for exempt and complying development 20 Nov 2026
Brisbane: Advertising Devices Local Law 2021; self-assessable devices; window signs 25% and 2 m²; prohibited devices Brisbane City Council: Advertising devices 20 Nov 2026
Brisbane footway signs: two per shop, 1 m × 0.6 m × 0.6 m, 450 mm from kerb, 2 m corridor, within 4 m of boundary, trading hours; business centre and industry environments Brisbane City Council: Permitted Advertising Devices Designation 20 Nov 2026
City of Sydney: sandwich boards and advertising A-frames not permitted on the footway City of Sydney: Display of Goods on the Footway policy 20 Nov 2026
City of Adelaide: compliant moveable signs without a permit City of Adelaide: Objects on footpath 20 Nov 2026
Hobart footpath signs City of Hobart: Public Spaces By-law 20 Nov 2026
Queensland councils: advertising device approvals ABLIS: Advertising device approval (Queensland) 20 Nov 2026
WA: Main Roads approval for commercial advertising signs on or near main roads; Main Roads Act 1930 and Regulations 1996 ABLIS: Main Roads Western Australia approval 20 Nov 2026
WA: WAPC approval for advertisements on land reserved by a region planning scheme, with the one-per-business, 1 m², 5 m exemption (31 Mar 2025) WA Planning Commission: Operational Policy 5.4 20 Nov 2026
SA: checking whether you need approval PlanSA: Find out if you need approval 20 Nov 2026
SA example: approval needed in most cases, including erecting a sign; change in external advertising signs City of Unley: Do I need development approval? 20 Nov 2026
Tasmania example: approval depends on type, size, zoning and heritage City of Hobart: Signs 20 Nov 2026
ACT: movable signs must follow the Code of Practice; NCA areas ACT Government City Services: Movable signs 20 Nov 2026
ACT: business signs A-frame, 900 × 1200 mm including frame, two per business, 1.2 m from kerb, 2.5 m walkway, 20 m from traffic lights and intersections, light rail corridor, $10 million insurance ACT: Public Unleased Land (Movable Signs) Code of Practice 2023 (No 1), DI2023-244 20 Nov 2026
NT example: moveable sign permits, zones, sizes, 2 m path, removal in high winds City of Darwin: Advertising sign permits 20 Nov 2026
Council permit search ABLIS (Australian Government) 20 Nov 2026
A Frame Signs: metal frame with two 600 × 900 mm, 5 mm boards, A$125; frame drawing 670 mm D Vivid Ads: A Frame Signs 20 Nov 2026
Budget A-Frame Signs: 600 × 900 mm, A$75 Vivid Ads: Budget A-Frame Signs 20 Nov 2026
Corflute Signs: 600 × 900 mm, one sign, A$136.13 (minimum order charge applies) Vivid Ads: Corflute Signs 20 Nov 2026
Pull Up Banners: 800 × 2000 mm, A$89 Vivid Ads: Pull Up Banners 20 Nov 2026

Rules, fees and policies change. Check the current legislation, your council's current rules and the conditions of any approval you hold, and tell us if a source above has changed so we can update this page.

What our customers say

“Have put the cafe borders in place customers happy to have the wind break. Councils happy to have border”
— John W., 18 Jun 2025 · Verified buyer
“…Fast production and great quality of an A frame.”
— Gabriela C., 1 Jun 2026 · Verified buyer
“…They look amazing and we are very happy with our new signage. Looks great on the sidewalk of the street!”
— Lesa W., 29 Oct 2026 · Verified buyer

Short excerpts from reviews customers left about Vivid Ads on our store reviews, quoted word for word (including any typos). Read all our customer reviews.

Published and funded by Vivid Ads, an Australian signage manufacturer in Derrimut, Victoria. We print in Derrimut on our own HP and Canon print fleet. Editor: Zulfeqar Ahmed, CEO. We are a sign printer, not a planner, lawyer or council. This page is general information from the official sources listed, not legal or planning advice. Rules differ between councils, change over time and can depend on your exact site (zone, overlays, road type and permit conditions), so confirm what applies with your council, road authority or a planning professional before you place or install a sign. Prices come from our live website on the date shown and can change. How we check · Found a mistake or an out-of-date rule? Email sales@vividads.com.au. Change log: 20 Nov 2026: first published; state and council sources checked 20 Nov 2026. Same day, after AI-assisted fact-checks before and after publishing: added the ACT Code of Practice and Brisbane Designation details, the WA reserved-land exemption, and qualified the NSW, SA and Tasmania summaries. 21 Nov 2026: reviewer byline and customer review excerpts added; reviewer added to the page data.