Banners

How to Hang a Fabric Banner: Eyelets, Rod Pockets or Velcro?

5 November 2026 · Vivid Ads production team

How to Hang a Fabric Banner: Eyelets, Rod Pockets or Velcro?

How you hang a fabric banner depends on the finish you choose when you order. Eyelets let you tie it to a frame, pole or rail. Rod pockets top and bottom let you slide in a rod to hang it from a ceiling or bar. Velcro on all four sides lets you fix it to a frame or a carpeted exhibition wall. Hemmed edges suit a banner you'll fix yourself. Choose the finish to suit where the banner is going before you finalise the design. This guide walks through each finish, when to choose vinyl instead, and how to care for fabric so it lasts.

Our custom fabric banners are dye-sublimation printed on 250gsm polyester at our factory in Derrimut, Melbourne. With dye-sublimation the ink goes into the fibre instead of sitting on top, so you get a soft matte finish with no glare under lights, and the ink is part of the fabric, so there's no surface layer to crack or peel. We finish most of these with rod pockets for shop ceilings or Velcro for expo walls. The catch is that fabric is made for indoor use. It's covered in more detail below.

Dye-sublimation printed fabric banner made by Vivid Ads in Derrimut
A dye-sublimated fabric banner from our Derrimut factory.

The four finishing options at a glance

Finish Best for How you hang it
Hemmed edges only Banners you'll staple, clip or frame yourself Your own fixings
Hemmed edges with eyelets Indoor frames, stage rails, poles, gazebo frames under cover Cable ties, rope, hooks or bungee cords through the eyelets
50mm rod pockets, top and bottom Hanging from a ceiling, a bar or a wall bracket A rod in the top pocket to hang it, and a rod in the bottom pocket to weigh it down
Velcro on all four sides (hook or loop) Exhibition booths, fabric frames, carpeted panel walls Press it onto the matching Velcro or onto loop-compatible carpet panels

Option 1: hemmed edges

The edges are folded and stitched, giving a clean, durable border with nothing added. Choose this if you already have a hanging system, such as poster clips, a snap frame, magnets or a display rail, or if the banner will be stapled or pinned to a timber batten. It's also the neatest choice if the banner will be framed.

Option 2: hemmed edges with eyelets

Eyelets (also called grommets) are reinforced rings set into the hem. They're the most flexible option. You can cable-tie the banner to a frame, thread rope through to hang it between two points, or use S-hooks on a rail.

  • Tension it evenly. Tie the corners first, then work inwards so the banner pulls flat without puckering around any one eyelet.
  • Use bungee cords where it can move. Under a gazebo or in a draughty hall, bungees give a little and take strain off the eyelets.
  • Keep it under cover. Eyelets make a fabric banner easy to fix to a fence, but that doesn't make it an outdoor banner. See the vinyl section below.

Option 3: rod pockets for ceiling and wall hanging

This is the classic way to hang a banner in retail stores, shopping centres, conference halls and churches. We fold the top and bottom edges to the back and sew them into 50mm pockets. Slide a rod through the top pocket to hang the banner from wires, chains or brackets. Slide another through the bottom pocket for weight. The bottom rod is what stops a hanging banner curling and sagging, so don't skip it.

  • Choose rods that fit easily inside a 50mm pocket and are slightly wider than the banner, so the ends stick out for hooks or wire.
  • Vertical banners hung from a ceiling look best with the bottom rod in place from day one. Fabric drops and settles quickly when it hangs freely.
  • Check your venue's rules for ceiling rigging before the event. Many expo halls only let their own riggers hang anything from the ceiling.

Option 4: Velcro (hook or loop) on all four sides

Velcro is the fastest way to fit a banner to an exhibition booth or a fabric frame, and it's easy to take off and put back up. Velcro has two halves:

  • Hook is the rough, scratchy side. Choose hook if you're attaching the banner to loop Velcro or to the carpet-style panels used in many shell scheme booths.
  • Loop is the soft, fuzzy side. Choose loop if the surface you're attaching to already has hook Velcro on it.

If you're not sure what's on the stand wall, ask the event organiser or your stand builder before you order. Getting the halves the wrong way round is an easy mistake to make. If you're fitting a standard exhibition booth, also look at our shell scheme fabric graphics.

Fabric or vinyl: which banner should you choose?

The short answer is fabric for indoors, vinyl or mesh for outdoors.

  • Choose fabric for indoor events, shopfront windows, backdrops, photos and anywhere the banner sits under lights. Fabric has no glare, it folds and travels well, and it's machine washable. Our fabric banners are single-sided only.
  • Choose a vinyl banner for outdoor fences, building fronts, sports grounds and long-term outdoor display, where the banner will be rained on and left out. Please ask us for a quote for vinyl.
  • Choose a mesh fence banner for long runs of fencing or windy sites. The open weave lets wind pass through instead of loading up the fence. Mesh banners are made to order on request, so ask us for a quote.
  • Need fabric printed on both sides? Fabric banners are single-sided, so for a double-sided fabric display look at fabric banner stands or double-sided stretch fabric media walls.

Sizes and artwork

Horizontal fabric banners range from 1000 x 600mm to 3000 x 2000mm, and vertical banners from 1000 x 2000mm to 1500 x 5000mm. A custom size option is also available. The product page calculator gives the exact price for your size and finish.

For artwork, send a print-ready PDF (AI and EPS are fine too) at the finished size, at 150 to 300 DPI, in CMYK, with fonts embedded or outlined. Start from the template for your size and keep text away from the edges. Hems, pockets and Velcro all sit on the edge, so anything right on the border can be folded under. Our print-ready file guide covers this in more detail. If you don't have artwork, our design team can create it as a paid service. We also offer an optional paid Premium Artwork Check if you'd like a designer to review your file. Either way, every printed order includes a free digital proof, and we don't print until you approve it.

Caring for a fabric banner

  • Washing: wipe with a soft cloth and mild detergent, or cold machine wash on a gentle cycle. Avoid harsh chemicals and abrasive scrubbing. See how to clean fabric banners.
  • Creases: the fabric is wrinkle-resistant. Hanging it with the bottom rod in place lets most folds drop out.
  • Sun: dye-sublimated fabric holds its colour well, but long periods in strong direct sun will slowly fade any printed fabric. Take it down when it isn't needed.
  • Storage: store it clean and dry, rolled rather than tightly folded. See how to store fabric banners.

Production and delivery

Every banner is printed and finished at our factory in Derrimut, VIC. Small quantities (1 to 15 banners) are ready to dispatch one working day after you approve your proof by 3pm Melbourne time. Larger runs take longer, and the product page shows the timing for your quantity. We don't offer same-day production. Delivery is calculated at checkout for your address, or you can pick up free from the factory.

Frequently asked questions

How do I hang a fabric banner on a wall?

Choose rod pockets and hang the top rod from two hooks or brackets, choose eyelets and use screw hooks or a rail, or choose Velcro and fix matching Velcro strips to the wall. For a banner you'll pin or frame yourself, hemmed edges are enough.

Can a fabric banner go outside?

Our fabric banners are made for indoor use. For outdoor fences or long-term outdoor display, choose a vinyl banner or a mesh fence banner, and ask us for a quote.

What is the difference between hook and loop Velcro?

Hook is the rough, scratchy side and loop is the soft, fuzzy side. Order the half that's the opposite of what's already on the surface you're attaching to.

What size are the rod pockets?

Our rod pockets are 50mm, sewn along the top and bottom edges.

Can fabric banners be printed on both sides?

No, fabric banners are single-sided. For double-sided fabric, choose a fabric banner stand or a double-sided media wall.

Can I wash a fabric banner?

Yes. Cold wash on a gentle cycle, or wipe with mild detergent and water. Avoid harsh chemicals.

Reviewed by the Vivid Ads production team, Derrimut VIC. Checked 5 November 2026.

Find Vivid Ads faster on Google

Get 10% off your first order

Join 40,000+ Australian businesses on our list — print tips, seasonal deals and new-product drops. No spam, unsubscribe anytime.