Exhibition stand design ideas, layouts and rules

Home / Trade Show Guide / Stand design ideas
TRADE SHOW GUIDE · STAND DESIGN

Exhibition stand design: ideas, layouts and the rules to design around

How to design a trade show stand that people walk into — layouts for each stand type, back-wall graphics that work, ideas by budget and industry, and the exhibitor-manual rules that shape every design.

✓ Rules checked against Australian exhibitor manuals on 18 Nov 2026 (2025–2027 show editions — see sources)

Start with your stand type

How many sides face an aisle decides where your walls, graphics and entrance go. Your floor plan shows which type you've booked.

aisle1 open side

Inline

The back wall is your billboard. Keep the front open and pull the table back or to one side.

aisle2 open sides

Corner

Two traffic flows. Put the main graphic on the back wall facing the busier aisle; keep the corner itself open.

aisles on three sides3 open sides

Peninsula

A centre back wall with graphics both ways, and space for visitors to walk through.

aisles on four sides4 open sides

Island

Seen from everywhere. Use a central feature or tower; manuals limit how much of each open side you can wall in.

Diagrams are conceptual. Pink = open to the aisle; black = walls.

Shell scheme, modular or custom-built?

Three ways to build your stand
Option What you get Good for Watch out for
Shell scheme Walls, fascia sign and usually lights supplied by the organiser's contractor; you add graphics and furniture. First shows, small budgets, 3 × 3 m stands Panel print sizes vary by show — check yours
Modular / portable Fabric back walls, banners and counters you own and reuse; usually set up without tools. Exhibitors doing several shows a year On space-only you still need flooring, power and lighting
Custom-built A stand designed and built for you by a stand builder. Large space-only stands and brand launches Design approval deadlines, build costs and storage between shows

Our summary of common options, not a rule.

The layout that works on most stands: three zones

Three-zone layout on a 6 by 3 metre stand Plan of a 6 by 3 metre inline stand: a back wall graphic, a meeting zone at the rear, an engage zone with a demo counter in the middle, and an attract zone along the aisle. Back wall: one message, readable from the aisle ③ MEET — table, seats, quiet conversations ② ENGAGE — demo, product, screen ① ATTRACT — open edge, banner to one side ← AISLE →
Conceptual plan, not to scale. On a 3 × 3 m stand, zones 2 and 3 often merge — see the three 3 × 3 m layouts below.
  1. Attract: keep the aisle edge open. A table across the front acts as a barrier; put it to one side or further back.
  2. Engage: the thing people stop for — a product they can touch, a short demo or a screen running a loop.
  3. Meet: somewhere to talk properly, towards the back, away from the walkway.

Our suggestions from producing displays for exhibitors — not rules.

Three ways to lay out a 3 × 3 m stand

Lead capture 3 by 3 metre plan: back wall headline, banner front left, small table and seats at the back right, QR or tablet station near the front, open floor. Back wall: headline + logobannertable+ seatsQR /tablet AISLE

Lead capture

Open front, QR or tablet near the aisle, a small table at the back for proper conversations.

Product demo 3 by 3 metre plan: back wall with a screen, demo counter across the middle with space in front for a small crowd, storage in a back corner. Back wall + screen at eye levelSCREENDemo counterstorage AISLE

Product demo

Counter pulled back from the aisle so a small crowd can gather in front without blocking it.

Selling on the day 3 by 3 metre plan: shelves along the back and one side, pay counter at the front right, open floor to browse. Back wall: brand + pricesshelves / product displaypaycountershelves AISLE

Selling on the day

Shelves on the walls, a pay counter to one side and an open floor so people can browse.

3 × 3 m inline stands, top-down view, not to scale. Black = walls; red = your displays and furniture; grey dots = visitors. Our suggestions, not rules.

Back-wall and banner graphics that work

Where to put your headline, call to action and details on a banner or back wall Side view: a 2 m banner beside a 1.7 m visitor and a 0.74 m table. Above about 1.5 m is the best zone for the headline and logo; 1.0 to 1.5 m suits a QR code or offer; below about 1 m is hidden by tables and people. HEADLINE+ logo QR / offer hidden zone table 0.74 m visitor 1.7 m above ~1.5 m:headline, logo1.0–1.5 m:QR code, offerbelow ~1 m:blocked by tablesand people 2 m1.51.00
Side view to scale (1 px ≈ 8 mm). Zones are our guide from producing displays, not a standard.

1. One message

What you do for the visitor, in a few words, at the top. Product lists belong on a brochure or screen.

2. Big enough

Around 50 mm letter height (not font size) is a starting point for a 6 m aisle; test yours with our text size tool.

3. Above head height

Visitors and your table hide the bottom metre. Keep the logo and headline high on the wall or banner.

4. Contrast

Dark text on light or light on dark; avoid text over busy photos.

5. One call to action

A QR code or offer at chest height, where people stand when they talk to you.

6. Print to the right size

Shell panels are often 950–990 mm wide, not 1 m. See panel sizes.

Rules that shape your design

These come from Australian exhibitor manuals. Your show's manual is the one that counts — check it before you brief a designer.

Common space-only design rules in Australian exhibitor manuals
Rule What the manuals say Example source
Open sides stay open All open sides at least one-third open, or fitted with transparent material. EXA (Perth), Naturally Good (Sydney)
Neighbours No branding on adjoining walls that overlooks neighbouring stands; walls above 2.5 m (with permission) solid and dressed on both sides. EXA, Naturally Good
Hanging banners Banners rigged on a boundary shared with a neighbour must be single-sided, or set in 1 m from that boundary. All rigging stays within your stand footprint. EXA, Fine Food
Height Walls of about 2.4–2.5 m are typical; going higher needs the organiser's permission, up to a maximum such as 4 m (AusRAIL) or 5 m (Integrate). This is separate from design approval below. See six manuals compared. Integrate, AusRAIL, PAX
Raised floors Raised floors up to 115 mm need ramped or bevelled edging (33–115 mm is called out specifically); above 115 mm counts as a step and needs a ramp if the public uses the stand. A bevelled trip edge is not the same as wheelchair access. Naturally Good
Lighting and electrics Halogen lights not permitted; electrical items tested and tagged. Naturally Good
Design approval Every space-only design submitted for approval — 28 days before at Integrate, 45 days before at EXA (check the exact date in your portal) — with dimensioned plan and elevation views. Hand-drawn designs not accepted. Integrate, EXA

Shell scheme? You can't change the walls, but you can cover the panels with printed graphics, add banners and a table cover, and order extra lighting or power from the contractor.

Stand ideas finder (tool)

Suggestions only, based on common stand set-ups. Budget bands cover printed displays, not stand space or furniture hire.

Ideas by industry

Wedding expos

Show your best work large on the back wall; couples browse in pairs, so leave space for two at your table. A simple enquiry form or QR beats a pile of brochures.

Food and drink

Sampling needs organiser and venue approval — see the MCEC and ICC Sydney rules. Keep a clean, wipeable counter at the front and stock behind.

Technology

A live demo on a screen at eye level, with the problem you solve in the headline. Order power early — it isn't always included.

Construction and trades

Real product samples people can handle; heavier items need the venue's freight and forklift rules.

Jewellery and small products

Lockable glass cabinets lit from above; extra spotlights over the counter matter more than a big wall.

Services and B2B

One sharp outcome on the wall, a case study on a screen, and seats for longer conversations.

Stand design brief checklist

Tick these off before you brief a designer or order graphics. Saved on this device; .

Planning the whole show? Use the 38-step exhibitor checklist.

VIVID ADS DISPLAY OPTIONS

Displays for each part of the stand

Photos are Vivid Ads product images, not taken at a listed show. Every printed order includes a free digital proof. Need artwork? Design it with AI from $9.95 per finished design (optional).

Questions people ask

How do I design an exhibition stand?

Start from your stand type and the manual's rules, decide on one message, then plan three zones: an open edge to attract people, something to engage them, and a place to talk. Brief your designer with the checklist above.

What makes a good trade show booth?

An open front, one clear message high on the back wall, something visitors can see or try, and staff standing at the edge rather than behind a table.

How do I make a small 3 × 3 m stand stand out?

Keep the floor open, put graphics high, use one strong colour and add lighting. See the three 3 × 3 m layouts above.

Can I put branding on the walls next to my neighbour?

Usually not facing into their stand. Manuals such as EXA's say adjoining walls must not carry branding that overlooks neighbouring stands.

How far ahead do I need to submit a stand design?

It varies — 28 days before the show at Integrate and 45 days at EXA, for example. Check your manual's deadline.

Sources

What Source Checked
Open sides, neighbours, banners, design submission EXA space-only information (Perth, March 2027 edition) 18 Nov 2026
Open sides, raised floors, lighting and electrics Naturally Good space-only information (Sydney, May 2025 edition) 18 Nov 2026
Height limits and design approval timing Integrate space-only rules · AusRAIL · PAX Aus 18 Nov 2026
Hanging banners near neighbours Fine Food Sydney space-only spec (September 2025 edition, PDF) 18 Nov 2026
Published and funded by Vivid Ads, an Australian signage manufacturer. Editor: Zulfeqar Ahmed, CEO. Layout and design advice is our suggestion; rules come from the manuals cited — your show's exhibitor manual always wins. How we check · Found a mistake? Email sales@vividads.com.au. Change log: 18 Nov 2026 — first published; height, floor and banner rules clarified after fact-check; source editions and build options added; 3 × 3 m layout plans, sightline drawing and product photos added.