Warning & Caution Sign Designs
From $13.61 inc GST·each for 10 · same $136 minimum as ordering one·Printed and dispatched in 24 hours
Ready-made warning and caution signs on 5mm corflute — the board most Australian sites use because it is light, weatherproof and cheap enough to replace when the job moves. Pick a design, change the wording to match your hazard, and it prints and leaves us in 24 hours. Every one is editable, and there is no design fee.
25 designs
No designs match that. Clear the search to see all 25.
12,000+ verified business reviewsPrinted and dispatched in 24 hoursFree artwork pre-flight check on every order
What you get
- What it costs
- $136 minimum order — and one sign or ten signs both come to $136. At 600 x 450mm that is $13.61 each for ten, or $8.23 each once you reach twenty-five.
- Material
- 5mm corflute — corrugated polypropylene. Light, waterproof, UV stable, and cheap enough to replace when the job moves.
- Size
- Any size you need. 600 x 450mm is the site standard; 600 x 900mm for entries and hoardings; 300 x 450mm for a door or a bay.
- Fixing
- Eyelets in the corners for cable ties onto fencing, or leave it plain to screw straight to a post.
- Printing
- Single or double sided, full colour UV inks. Outdoor life of roughly 12-18 months in direct Australian sun.
- Turnaround
- 24 hours in production once you approve the proof, if that lands by 3pm AEST on a working day.
Questions people ask
Do these meet Australian Standard AS 1319?
The compliance designs in this range are laid out to AS 1319 — the standard that governs safety signs in Australian workplaces — including the colour, the header word and the symbol. If you edit a design you can move away from that layout, so if compliance matters, change the wording only and leave the structure alone.
Warning or danger — which do I need?
Under AS 1319, DANGER is for a hazard that will cause death or serious injury if you ignore it, and it uses the white-on-red oval. WARNING and CAUTION cover hazards that could cause injury and use the yellow triangle. If you are unsure, the safer choice is the higher classification.
Can I put my own wording on it?
Yes. Open any design and rewrite it for your actual hazard. There is no design fee for editing a ready-made design, and no minimum on how much you change.
How long will it last outside?
Roughly 12–18 months in direct Australian sun on 5mm corflute with UV inks. For anything permanent, ask us about aluminium composite instead — same artwork, longer life.
How fast can I get it?
24 hours in production once your proof is approved, provided that reaches us by 3pm AEST on a working day. Then 1–3 business days to metro, 3–5 regional, 5–7 remote.
Design
Corrugated Plastic Signs·5mm corflute
—
Size (mm)
Need another size? Set your own in the editor.
How many — price each
signs
What you get
- What it costs
- $136 minimum order — and one sign or ten signs both come to $136. At 600 x 450mm that is $13.61 each for ten, or $8.23 each once you reach twenty-five.
- Material
- 5mm corflute — corrugated polypropylene. Light, waterproof, UV stable, and cheap enough to replace when the job moves.
- Size
- Any size you need. 600 x 450mm is the site standard; 600 x 900mm for entries and hoardings; 300 x 450mm for a door or a bay.
- Fixing
- Eyelets in the corners for cable ties onto fencing, or leave it plain to screw straight to a post.
- Printing
- Single or double sided, full colour UV inks. Outdoor life of roughly 12-18 months in direct Australian sun.
- Turnaround
- 24 hours in production once you approve the proof, if that lands by 3pm AEST on a working day.
Your wording is editable in the next step. Nothing is charged until checkout.
Nothing here quite right?
Start from a blank canvas or upload your own artwork — same price, same 24 hour turnaround.