Danger Sign Designs

From $13.61 inc GST·each for 10 · same $136 minimum as ordering one·Printed and dispatched within 24 hours of proof approval

Ready-made danger signs on 5mm corflute — the white-on-red oval that AS 1319 reserves for a hazard that will kill or seriously injure someone who ignores it. Electrical, chemical, confined space, overhead load, live plant. Pick the one that matches your hazard, change the wording to name it exactly, and it prints and leaves us within 24 hours of proof approval.

60 designs

Upload your own artwork Same price, same 24 hour turnaround. Free pre-flight check.
12,000+ verified business reviewsPrinted and dispatched within 24 hours of proof approvalFree artwork pre-flight check on every order

What you get

What it costs
$136 minimum order — one sign or ten both come to $136. At 600 x 450mm that is $13.61 each for ten, or $8.23 each at twenty-five. Sites usually order in tens because a danger sign that goes missing has to be replaced the same day.
Material
5mm corflute — corrugated polypropylene. Light, waterproof, UV stable, and cheap enough to replace when the job moves.
Size
600 x 450mm is the site standard. 600 x 900mm for a gate or a hoarding where it has to read from the far side of the yard. 300 x 450mm for a switchboard or a plant room door.
Fixing
Eyelets in the corners for cable ties onto fencing, or leave it plain to screw straight to a post.
Printing
Single or double sided, full colour UV inks. Outdoor life of roughly 12-18 months in direct Australian sun.
Turnaround
24 hours in production once you approve the proof, if that lands by 3pm AEST on a working day.

Questions people ask

Danger or warning — which one do I need?
AS 1319 draws the line by consequence, not by how alarming it feels. DANGER, in the white-on-red oval, is for a hazard that will cause death or serious injury if ignored — live electrical, confined space, unguarded machinery. WARNING and CAUTION use the yellow triangle and cover hazards that could cause injury. If you are genuinely unsure, the higher classification is the safer error.
Are these compliant?
The compliance designs in this range are laid out to AS 1319 — the colour, the header word, the symbol and the proportions. Editing is what these are for, but if compliance matters, change the wording only and leave the structure alone. Moving the header or recolouring the oval takes it outside the standard.
Can I add the hazard's actual name?
Yes, and you should. "DANGER — 415 VOLTS" or "DANGER — CONFINED SPACE, PERMIT REQUIRED" does more for a worker than a generic sign. There is space under the header word for exactly that.
Can I put my own wording on it?
Yes. Open any design and rewrite it for your own site, your own property or your own hours. There is no design fee for editing a ready-made design, and no minimum on how much you change.
How long will it last outside?
Roughly 12–18 months in direct Australian sun on 5mm corflute with UV inks. For anything permanent, ask us about aluminium composite instead — same artwork, much longer life.
How fast can I get it?
24 hours in production once your proof is approved, provided that reaches us by 3pm AEST on a working day. Then 1–3 business days to metro, 3–5 regional, 5–7 remote.

Nothing here quite right?

Start from a blank canvas or upload your own artwork — same price, same 24 hour turnaround.

Design your danger corflute signs