Street Pole Banners & Council Street Flags

Printed street pole banners and council street flags — dye-sublimated fabric, printed in 24 hours.

Please read this first: we print the banner fabric. We do not supply the pole brackets or mounting hardware. Most councils and event contractors already own their bracket sets and only need the printed panels reprinted each season — that is what this page is for. If you need brackets as well, source them separately before ordering.

What these are

The vertical banners you see running down a main street, mounted in pairs on light poles — for festivals, council seasonal campaigns, shopping precinct branding, university campuses and sporting events.

They are printed on dye-sublimated polyester, so the colour is in the fibre and does not crack, peel or fade the way a surface-printed vinyl would after a season outdoors. Pole pockets are sewn top and bottom to take the bracket arms.

Before you order

Three things determine whether the banner will fit:

• The bracket spacing — measure the distance between the top and bottom arm on your existing brackets. This sets the banner height.
• The pocket diameter — measure the arm. Standard is around 20mm, but confirm rather than assume.
• Single or double sided — street banners are seen from both directions, so double-sided is usually the right answer.

Send us those measurements and we will confirm the make-up before printing.

Reprints

Because the hardware stays on the pole, a seasonal campaign only reprints fabric. Order the same specification each time and it will fit the brackets you already have.